Sandtex 10 Year Exterior Multi-Surface Satin Paint

Sandtex 10 Year Exterior Multi Surface Satin Paint is a durable exterior paint designed for use on a wide range of surfaces including wood metal PVC U concrete and stone. The soft satin finish gives exterior surfaces a smoother lower sheen appearance while helping to protect against everyday weathering.

The flexible mould resistant formulation helps resist cracking peeling and flaking over time while the self priming formula allows easier application on many exterior surfaces without the need for a separate undercoat.

For a higher sheen finish with increased surface reflectivity see Sandtex 10 Year Exterior Multi Surface Gloss Paint.

Before applying Sandtex 10 Year Exterior Multi Surface Satin Paint ensure all surfaces are clean dry and free from dust grease loose material and other surface contamination. Previously painted surfaces should be checked for loose or flaking coatings and thoroughly sanded to provide a sound surface for adhesion.

• Repair cracks holes and damaged areas with a suitable exterior filler before painting
• Grey weathered timber should be sanded back to a clean sound surface before application
• Ensure bare wood is fully dry and treat knots and resinous areas with an appropriate knotting solution
• Non ferrous metals should be thoroughly abraded and cleaned with warm water and detergent to remove grease and surface contamination
• Powdery chalky or porous surfaces should be stabilised with Sandtex Quick Drying Stabilising Solution
• Ferrous metal and copper surfaces should first be primed with Sandtex 10 Year Exterior Multi Surface Primer Undercoat to aid adhesion to the surface
• Protect surrounding areas and mask glass brickwork and fittings before starting application

Always test a small area before starting your project to check suitability compatibility and final appearance. Do not apply in temperatures below 8°C or during damp humid conditions where drying may be affected.

• Stir thoroughly before and during use to maintain an even consistency and colour
• Apply using a good quality Synthetic Brush or a short to medium pile roller Velour Roller for best results
• Apply evenly along the surface and avoid overspreading the paint
• Allow the first coat to dry fully before applying additional coats
• Two to three coats are recommended to achieve a consistent durable finish
• If using multiple tins in the same area intermix them before application to maintain colour consistency
• Clean brushes rollers and equipment with warm soapy water immediately after use

1) What surfaces can Sandtex 10 Year Exterior Multi Surface Satin Paint be used on?
Sandtex 10 Year Exterior Multi Surface Satin Paint is suitable for a wide range of exterior surfaces including wood metal PVC U concrete stone brick aluminium and other non ferrous metals. Always ensure surfaces are clean dry and properly prepared before application.

2) Does Sandtex 10 Year Exterior Multi Surface Satin Paint require a separate primer?
The self priming formula can be applied directly to many previously painted and properly prepared surfaces without the need for a separate undercoat. Bare ferrous metals and copper should first be primed using a suitable primer such as Sandtex 10 Year Exterior Multi Surface Primer Undercoat.

3) What finish does Sandtex 10 Year Exterior Multi Surface Satin Paint leave?
It leaves a smooth satin finish with a soft low sheen appearance that is less reflective than gloss paint. Satin finishes are often chosen for a more contemporary look and can help soften the appearance of minor surface imperfections.

4) How many coats of Sandtex 10 Year Exterior Multi Surface Satin Paint are recommended?
Two to three coats are generally recommended depending on the surface condition colour change and porosity of the substrate. Allow each coat to dry fully before applying additional coats.

5) How long does Sandtex 10 Year Exterior Multi Surface Satin Paint take to dry?
Under normal drying conditions the paint is touch dry in approximately 1 to 2 hours. Additional coats are typically applied after 4 to 6 hours although drying times may vary depending on temperature humidity and airflow.

6) Is Sandtex 10 Year Exterior Multi Surface Satin Paint water based?
Yes this is a water based exterior paint which allows for easier application lower odour and simple clean up using warm soapy water after use.

7) Can Sandtex 10 Year Exterior Multi Surface Satin Paint help resist mould growth?
Yes the mould resistant formulation is designed to help reduce the appearance of mould and organic growth on exterior surfaces helping maintain a cleaner looking finish for longer.

=