Dulux Trade Clear Yacht Varnish - Gloss

  5.0/5.0 (4 reviews)
...
2 coats = Standard Protection
Total: enter area
3 coats = Ultimate Protection
Total: enter area

Wood type and application method can vary coverage.

  • A high-build, solvent-based varnish for the decoration and protection of exterior woodwork
  • Highly durable and flexible
  • Ready for use - no thinning required
  • Contains UV filters to protect timber against the damaging effects of direct sunlight
  • 3 Year Weathershield protection
  • Added fungicide to provide maximum protection
Brand Dulux Trade
No. of coats 2-3
Coverage Up to 16 per litre
Drying time 24 hrs
Size 1L, 2.5L
MPN 5180483, 5180484
GTIN 5010212568606, 5010212568835
  • To get the best results, ensure that surfaces to be coated with Dulux Clear Yacht Varnish are dry, clean and sound.
  • Remove all loose and defective coatings and previous paintwork, if necessary stripping back to bare wood.
  • Special precautions should be taken during surface preparation of pre-1970s paint surfaces they may contain harmful lead.
  • Thoroughly rub down all wooden surfaces in the direction of the grain to remove any grey, weathered wood and surface sheen from previous coatings.
  • Take care to remove all traces of sanding dust before applying Dulux Clear Yacht Varnish.
  • Seal all bare wood with 2 coats of Dulux Trade Aquatech Preservative Basecoat Plus (BP) including any new or bare replacement beading. Excess basecoat should be wiped off surrounding paintwork.
  • Fill any surface defects, open joints etc with a suitable wood filler and replace any missing glazing material. Do not use linseed oil putty for glazing. Rub down (denib) between coats.

Always do a test area before starting any project to test adhesion and final finish. Read the manufacturer's instructions on the tin at all times.

Stir thoroughly before and during application to ensure a consistent finish.

  1. Apply 2-3 coats of Dulux Trade Clear Yacht Varnish with a brush only.
  2. Allow 24 hours to dry.

For Health & Safety reasons relating to all solvent-based paints, spray application is not recommended. This product should not be applied if air or surface temperature is below 5℃.

This product does not require much in the way of maintenance, but as a guide if the original finish starts to wear over time, a new coat can be applied following the Preparation and Application instructions.

4 customer reviews
5/5.0
 
Goes far by Ryan Davies

Went really far brought out a great shine over a dark stained fascia board and the end product looked fantastic

Reviewed 2.5L on: 08/10/16
Went far by Ryan Davies

Brought up a great shine and finish to a dark wood stained fascia

Reviewed 1L on: 08/10/16
Nice finish by Philip Platt

Leaves a really nice gloss finish, takes a while to dry though. Cant comment on durability.

Reviewed 1L on: 19/05/16
Easy To Apply by William Stephenson

Excellent Coverage, Easy To Apply, Highly Quality Finish.

Reviewed 2.5L on: 05/04/16