Woca Natural Soap

Woca Natural Soap is a safe and effective maintenance solution, which penetrates deep into the wood removing dirt, whilst preventing it from drying out and cracking. Can be used on bare softwood, leaving a waxed finish.

• For a handy-to-use alternative try Woca Natural Soap Spray for smaller targeted areas
• Looking to maintain areas affected by heavy wear and tear? Use Woca Maintenance Gel
• Looking for an all-in-one cleaning and maintenance kit for solid wood and engineered wood flooring? See Woca Maintenance Box for Oiled Floors

Ensure areas to be treated are clean, dry and free of any loose dirt, grit or other surface contaminants by vacuuming or sweeping. Stubborn dirt and stains should be cleaned first using a Woca Intensive Wood Cleaner or Woca Intensive Wood Cleaner Spray.

Always do a test area before starting any project to assess product suitability and final finish. Shake well before and during use. Ensure room temperature stays around 20°C during application and drying. Thoroughly read and follow the manufacturer's instructions on the container at all times.

1. Mix 125 ml of Woca Natural Soap with 5 litres of cold water
2. Using a cotton mop or cloth, clean floors in small manageable sections to ensure complete coverage, following the woods natural grain where possible
3. Briefly allow the soap to sit on the surface, to penetrates the dirt and grease before removing
4. Rinse the mop thoroughly during cleaning to prevent dirt being re-applied to floors
5. Then do a final wipe over with the clean soapy water, this will leave a protective, waxy film

Please Note: Excessive use of water can damage wooden floors. Always keep the amount of water used to a minimum. Use a damp mop rather than wet.

Maintenance

If floors begin to look worn or tired over time, simply clean as above, using Woca Intensive Wood Cleaner and apply Woca Maintenance Gel to keep floors revitalised and looking their best.