Always do a test area before starting any project to assess product suitability and final finish. Follow the manufacturer's instructions on the container at all times.
Untreated wood surface
- Mix 125ml of Woca Intensive Wood Cleaner with 2.5 litres of warm water
- Using a mop or cloth, clean the surface in small manageable sections to ensure complete coverage, following the woods natural grain where possible
- Repeat the process for any stubborn stains
- Rinse the mop or cloth thoroughly during cleaning to prevent dirt being re-applied to floors
- Allow the surface to dry completely before finishing with oil, wax or varnish
Oiled and waxed wood surfaces
- Mix 125ml of Woca Intensive Wood Cleaner with 2.5 litres of warm water
- Using a mop or cloth, clean the surface in small manageable sections to ensure complete coverage, following the woods natural grain where possible
- Allow the solution to sit on the surface for 5 minutes, before wiping off with a clean mop or cloth
- Handheld pads or a floor machines can also be used
- Repeat the process for any stubborn stains
- Rinse the mop or cloth thoroughly during cleaning to prevent dirt being re-applied to floors
- Allow the surface to dry completely
- Surfaces will need to be re-finished with oil, wax or varnish
Lacquered wood surfaces
- Mix 125ml of Woca Intensive Wood Cleaner with 5 litres of warm water
- Using a mop or cloth, clean the surface in small manageable sections to ensure complete coverage, following the woods natural grain where possible
- Repeat the process for any stubborn stains
- Rinse the mop or cloth thoroughly during cleaning to prevent dirt being re-applied to floors
- Allow the surface to dry completely
- The surface should now be refreshed using Woca Master Care.
Please Note: Excessive use of water can damage wooden floors. Always keep the amount of water used to a minimum. Use a damp mop or cloth rather than wet.