Woca Master Care

Woca Master Care is a ready to use maintenance coating suitable for a large variety of hard surface floors, including lacquered, painted, PVC, vinyl / LVT and laminate flooring. Evens out the appearance of flooring for a refreshed, new look on surfaces with 30 - 40% sheen. Made from polymer and wax emulsions for continued protection and longevity of the surface.

• Looking for an all-in-one cleaning and maintenance kit for hard floor surfaces such as vinyl / LVT and laminate flooring? See Woca Vinyl, Laminate and Lacquer Care Kit

Dry sweep or vacuum floors to remove any loose dirt and grit to avoid scratching your floor.

Clean floors thoroughly with Woca Intensive Wood Cleaner or Woca Intensive Wood Cleaner Spray, wipe off with clean water and allow to dry completely

Always do a test area before starting any project to assess product suitability and final finish. Follow the manufacturer's instructions on the bottle at all times. Shake bottle thoroughly before use and apply at normal room temperature, 18-25°C.

1. Using a wool pad or lacquer roller, apply a thin coat evenly in small manageable sections, to ensure complete coverage
2. Smooth in the direction of the wood grain where possible
3. If needed, rinse the pad/roller during application to prevent dirt being re-applied to floors
4. Allow treated floors to completely dry, usually around 30 to 60 minutes, before resuming normal use

Please Note: Additional coats of Woca Master Care should not be applied whilst the floor is drying.

Cleaning Equipment

Clean tools with soap and water directly after use.

Regular Cleaning

Dry sweep or vacuum floors, then clean with Woca Master Cleaner.

Maintenance

When the floor is starting to show signs of wear and needs freshening up, clean the floor as above and, once dry, apply a fresh layer of Woca Master Care. Reapply about twice a year to keep floors revitalised and looking their best.