Repair Care DRY FLEX 1 2-in-1

Repair Care DRY FLEX® 1 2-in-1 is a very quick drying, flexible repair compound for both emergency and permanent repairs on interior and exterior wood surfaces, such as windows, doors, stairs, furniture, fascias and soffits. Ideal for small, quick repairs with a thickness level of 5-15mm. Once set, it has excellent mechanical features, naturally moving like wood. It can be sanded and finished to match the surrounding area after 1 hour. Easy to use.

• For a two-part filler for small quick repairs, use Repair Care DRY FLEX 1
• In need of a filler for small to medium repairs? Use Repair Care DRY FLEX 4 or Repair Care DRY FLEX 4 2-in-1
• Looking for a filler for large repairs? Try Repair Care DRY FLEX 16

Ensure that areas to be filled are clean, dry and free from surface dust and debris, removing any damaged and rotten wood from the area.

• To ensure maximum adhesion between the substrate and Repair Care DRY FLEX® 1 2-in-1, treat the prepared area using Repair Care DRY FIX UNI.

Always do a small test area before starting any project to assess performance and end result. Follow the manufacturers instructions on the container at all times.

Optimum application is achieved between 0°C and 25°C with good air movement and ventilation.

1. Insert into the Repair Care EASY.Q Professional Dispensing Gun
2. Dispense the tube onto a Repair Care EASY.Q Mixing Plate and mix using a Repair Care EASY.Q Steel Application Knife, until it reaches a solid orange colour
3. Spread the mixture thinly across the mixing plate, as this will extend the application period
4. Apply the coating to the prepared area, using the metal knife
5. Immediately remove any excess product
6. Allow 1 hour to fully cure

Please Note: Always wear suitable Protective clothing, goggles and Repair Care EASY.Q Disposable Nitrile Gloves.

How long will a repair last if I used Repair Care?

The Repair Care products are fantastic quality and with the correct preparation and application, DRY FLEX® repairs will last for the lifetime of the substrate. The repairs will also significantly extend redecoration cycles.

Can a normal dosing skeleton gun be used for the Repair Care 2 in 1 system?

Yes, a normal chalking gun should be fine for this product such as ProDec Extra Strong Caulking Gun