Product Image

Repair Care DRY FIX UNI

From £34.02
Skip to product information

Repair Care DRY FIX UNI

4.7/5 (6 reviews)
Product Image
Repair Care DRY FIX UNI
size
From £34.02

Quantity

A pre-treatment in preparation of permanent repairs to interior and exterior windows, doors, furniture and more

Features

  • A two-component, universal primer for use on interior and exterior wood
  • For the repair of rotten and damaged wood, strengthening the wood fibres
  • Formulated to provide maximum adhesion between the substrate and Dry Flex coating
  • Low viscosity for deep penetration of the wood surface
  • Turns yellow when fully mixed
  • Extra long open time of 1 hour
  • Solvent Free
Brand
Repair Care
Drying time
1 hr
No. of coats
1 coat
Size
120ml, 300ml
MPN
Please make a selection
GTIN
Please make a selection

Overview

Repair Care DRY FIX® UNI is a quick drying, solvent free primer for the preparation of permanent repairs on all interior and exterior wood surfaces, such as windows, doors, stairs and furniture. It's unique colour control mixing system ensures the product is mixed correctly, by turning yellow when ready. Provides a suitable surface for subsequent over-coating with the BIO FLEX® and DRY FLEX® repair products.

Please Note:

Repair Care Dry Fix Uni is a two-component product supplied in pre-measured packs for easy mixing. The 120ml kit contains 80ml of Component A and 40ml of Component B, while the 300ml kit includes 200ml of Component A and 100ml of Component B. Both sizes maintain the correct 2:1 mix ratio for reliable performance and consistent results.

Preparation

Ensure that areas to be coated are clean, dry and free from surface dust and debris, removing any damaged and rotten wood from the area.

Application

Always do a small test area before starting any project to assess performance and end result. Follow the manufacturers instructions on the container at all times.

Optimum application is achieved between 0°C and 35°C with good air movement and ventilation.

Mixing Guidelines

  1. Start with component A and shake well before use
  2. Tip the bottle upside down and using the guide lines on the side, empty only to the next line
  3. Squeeze the contents into an Repair Care EASY.Q Mix and Fix Set
  4. Now add component B, tipping it upside down and using the guide lines to the next line only
  5. Squeeze into the same mix and fix cup as component A.
  6. The mixing ratio should be 2 parts component A to 1 part component B
  7. Stir using the supplied spatula until mixture turns yellow
  8. Apply to prepared area, using a disposable synthetic brush
  9. Allow between 20 and 45 minutes maximum to fully penetrate the wood, removing any excess with absorbent paper

Please Note: Always wear suitable Protective clothing, goggles and Repair Care EASY.Q Disposable Nitrile Gloves.

FAQ

Can the Repair Care Dry Fix be used on concrete and brick?

Yes, this product can be used on many surfaces, excluding plastic.

Can Repair Care Dry Fix Uni be used on fibreglass?

Absolutely, the Dry Fix is great for a number of projects and substrates.

What is the Dry Fix for?

DRY FIX® is a primer coat of epoxy resin which is absorbed into the substrate creating a permanent bond between the substrate and DRY FLEX® repair. It is not a wood hardener and it is important to remove all decayed timber before applying DRY FIX®.

Datasheets

Product Information Safety Information
  • 5 stars: 5 (83%)
  • 4 stars: 0 (0%)
  • 3 stars: 1 (17%)
  • 2 stars: 0 (0%)
  • 1 star: 0 (0%)
S
S AJ
Good Product

Not the cheapest product but really works well.

N
Nigel Downes
A lucky discovery

A shame brushes can't be re-used but this product seems perfect for restoration of the 122yr-old woodwork on my Edwardian House. Useful videos on line of how to use. Not a wood hardener.

M
Mr Marshall
Great product

Seen a few videos of this product being used, used it for myself a lot quicker than splicing timber for repairs.

D
David Taylor
Great product, easy to use

Follow the instructions and it’s really easy to use. Will definitely get more if required.

T
Trev Hodgy
Repair Care DRY FIX UNI definitely fit for purpose. Easy to use. Clear instructions. Excellent pr...

Used as a primer, alongside Dry Flex 4 2-in-1. Followed youtube video. The outcome, after very careful application, was perfect. Applied after knurling out the waste wood in 2 separate areas of our wooden windowsill. Sill, after use of the Dry Flex 4 2-in-1, and finishing paint, now as good as new. Very pleased, indeed. Would highly recommend and certainly use again.

S
Steve Talbot
May be

I bought this product to use in respect to the 2 in 1 filler, not have had a lot of experience yet, I have mixed views regarding the success. It seemed to take a lot of time to dry, Don't know the success in the long term. Its defiantly easy to apply, and mound into shape, not so easy to shape once set. I was hopping for more particularly because of the cost. I may prefer 5 star wood rot preservative with the traditional 2 part fillers

You may also like