Liberon Natural Finish Interior Varnish

Name: Liberon Natural Finish Interior Varnish
Rating: 4.50 (6 reviews)

4.5/5 (6 reviews)

sheen

Matt Satin

size:

£19.26

Quantity

A clear, water-based varnish for interior softwood and hardwood surfaces. Highly resistant to scratches and stains.

Features

A clear, water-based varnish designed to retain the natural, untreated look of wood
Suitable for interior softwood and hardwood surfaces
Provides a hard, durable and long lasting finish
Highly resistant to scratches and stains
Quick drying formulation
Endorsed by the Guild of Master Craftsmen
Low V.O.C

Brand

Liberon

Drying time

2 hrs

No. of coats

3 coats

Size

MPN

Please make a selection

GTIN

Please make a selection

Overview

Liberon Natural Finish Interior Varnish is ideal for protecting and maintaining the natural look and feel of interior woodwork, such as skirting boards, doors, work surfaces and panelling. It is suitable for use in high moisture environments, such as kitchens and bathrooms.

Please Note: The product may raise the grain on some hardwoods. Natural Finish Interior Varnish is not suitable for applying over an oil-based finish.

Looking for a floor varnish that retains the natural, untreated look? Try Liberon Natural Finish Floor Varnish

Preparation

Ensure the surface is clean, dry and free from dust, dirt or any other surface contaminants. Any previous finishes must be removed and the surface stripped back to bare wood.

Remove any existing wax finishes with Liberon Wax and Polish Remover
Remove any existing varnish finishes with a suitable paint stripper or varnish remover
Alternatively, remove any previous finishes by sanding, taking care to remove all traces of sanding dust with a vacuum cleaner or damp cloth prior to varnishing

Application

Always do a test area before starting any project to assess product suitability and final finish. Follow the manufacturer's instructions on the tin at all times. Ensure good ventilation during application and drying.

Shake / stir the contents of the tin thouroghly before use
Apply the first coat evenly, using a suitable brush or short hair roller
Allow to dry for a minimum of 2 hours before applying further coats
We recommend a minimum of 3 coats are applied, sanding lightly between coats
More coats may be required for heavy traffic areas
Allow the final coat of varnish a minimum of 24 hours drying time

Aftercare

Regular Cleaning

Varnished surfaces can be wiped over with a damp, lint-free cotton or microfibre cloth. For more stubborn stains and marks, use a dedicated pH balanced Interior wood cleaner.

Maintenance

If the surface shows signs of wear over time, apply a fresh coat of Liberon Natural Finish Interior Varnish, following the Application instructions above.

Datasheets

Product Information Safety Information

5 stars: 5 (83%)
4 stars: 0 (0%)
3 stars: 0 (0%)
2 stars: 1 (17%)
1 star: 0 (0%)

Dont try with Liberon Wood Dye

At first everything was fine and the paint covered the tree well, but after it dried and the recommended varnish was applied, strange yellow spots appeared on the surface.

Does what it says on the packet.

Foes what it says on the packet

Great product, just right for the job!

Needed for Veneered doors, which this fitted the bill perfectly

Excellent product which does exactly what it says on the tin!

Paints on very easily, amazing finish, good price compared to some other product that profess to do as well

Great!

Purchased with Liberon floor varnish which I used on stair treads. Applied 3 coats of interior varnish to our 1930s oak bannister, lightly sanding I between coats. Lovely matt finish, just as I wanted. Great product!