Liberon Natural Finish Floor Varnish

Liberon Natural Finish Floor Varnish is designed to better retain the natural, untreated appearance of wooden floors. Specifically formulated to prevent the darkening or damp appearance normally associated with other clear floor oils and varnishes.

Please Note: While this product may slightly darken some wood species although most woods will not be affected by this varnish.

The natural feel created by this product is due to the fact that it creates a more textured feel than other water-based varnishes.

Ensure that floors to be varnished have been properly and correctly sanded, are clean, dry and free from dust, dirt or any other surface contaminants.

1. Any previous finishes must be removed and the surface stripped back to bare wood
2. Remove any existing wax finishes using Liberon Wax and Polish Remover
3. Any previous varnishes can be removed with a suitable paint and varnish remover
4. Fill any gaps or imperfections with a product from the range of Liberon wood fillers or an alternative floor filler
5. Ensure that floors are sanded correctly and are ready for the varnish
6. Take care to remove all traces of sanding dust and debris with a vacuum cleaner

Always do a test area before starting any project to assess product suitability and final finish. Follow the manufacturer's instructions on the tin at all times. Ensure good ventilation during application and drying.

1. Shake / stir the contents of the tin thoroughly before and periodically during use
2. Apply the first coat of varnish evenly, using a suitable floor brush, pad, or short hair roller
3. Allow to dry for a minimum of 2 hours before applying further coats
4. Liberon recommend a minimum of 3 coats, sanding lightly between coats
5. More coats may be required for heavy traffic areas
6. Allow the final coat of varnish a minimum of 24 hours drying time before using the floor

Regular Cleaning

Varnished surfaces can be wiped over with a damp, lint-free cloth or microfibre mop, using a dedicated floor cleaner if required. Any spillages must be wiped up immediately.

Maintenance

If the surface shows signs of wear, simply apply a fresh coat of Liberon Natural Finish Floor Varnish, following the 'preperation' and 'application' instructions above.