Crown Trade Clean Extreme Mould Inhibiting Scrubbable Matt

Crown Trade Clean Extreme Mould Inhibiting Scrubbable Matt is a practical choice for kitchens, bathrooms and other interiors where mould protection is a priority. Suitable for both new decorating projects and refurbishment work, it provides the option to carry the same colour and sheen across walls, ceilings and accompanying wood and metalwork.

Suitability

Suitable for interior plaster, plasterboard and previously painted walls and ceilings, alongside wooden doors, skirting boards, architraves and appropriately primed metalwork. It can be used on new surfaces or existing paintwork that is sound, firmly adhered and correctly prepared. Existing mould must be treated and removed before decorating.

Explore other Crown Trade Clean Extreme paints for different decorating requirements.

Product Use Crown Trade Clean Extreme Clean Air Scrubbable Matt Scrubbable matt paint with air-purifying technology that helps improve indoor air quality by reducing airborne formaldehyde Crown Trade Clean Extreme Anti Bacterial Scrubbable Matt Stain-resistant, scrubbable matt paint with SteriTouch® Silver Ion Technology to help defend against bacteria such as MRSA and E. coli Crown Trade Clean Extreme Stain Resistant Scrubbable Matt Durable, stain-resistant matt paint for busy interior areas where surfaces need regular cleaning

Before painting, ensure all surfaces are sound, clean and suitably dry. Remove any contamination or loose material that could prevent the paint from adhering.

1. Remove peeling or poorly adhering paint and feather the edges of the remaining sound coating
2. Take special precautions when preparing pre-1960s painted surfaces, as they may contain harmful lead
3. Treat mould, algae and other organic growth with a suitable fungicidal solution, such as Sandtex Fungicidal Wash, and remove it before painting
4. Clean previously painted surfaces with warm water and liquid detergent to remove dirt and grease. Rinse thoroughly and allow to dry
5. Repair holes, cracks and shallow defects with a suitable filler, such as Prestonett Ready Mixed Interior and Exterior Filler. Once dry, sand smooth and remove the dust
6. Wet abrade sound gloss or eggshell coatings to provide a key, then rinse away residues and allow to dry
7. Seal powdery surfaces with a suitable stabilising solution, such as Sandtex Quick Drying Stabilising Solution
8. Prime porous walls and ceilings with a mist coat of Crown Trade Clean Extreme Mould Inhibiting Scrubbable Matt diluted with 20-40% clean water by volume
9. Prime polished or dense surfaces with a suitable adhesion Primer, following the primer manufacturer's preparation and overcoating instructions
10. Patch prime bare and filled areas as appropriate for the surface. Touch in repairs made after priming with the same primer or diluted mist coat
11. Where contamination remains that could cause staining or bleeding, patch prime with a suitable stain-blocking primer

Preparation for Wood and Metal Surfaces

1. On bare wood, remove dust and wipe away timber oils or extractives with methylated spirits. Treat knots with two coats of Colron Knotting Solution, fill defects, sand smooth and apply a suitable primer undercoat
2. On previously painted wood, remove failing paint and sand away grey or weathered timber. Treat exposed knots with a suitable knotting solution, fill defects, clean and wet abrade sound paint, then spot prime bare areas with a suitable primer undercoat
3. Remove rust and millscale from iron and steel back to clean, bright metal. Remove residues and apply a suitable metal primer, within the same working day, following the primer manufacturer's instructions
4. Pre-treat bright galvanised metal with a suitable T Wash, following its instructions, before applying a suitable metal primer. Prime bare non-ferrous metals with a primer specified for the metal concerned
5. Clean and wet abrade sound paint on previously decorated metal. Spot prime exposed metal, allow to dry and apply a suitable primer undercoat overall

Always apply to a small test area first to check suitability, colour and final finish. Follow the manufacturer's instructions at all times.

Ensure you have enough Crown Trade Clean Extreme Mould Inhibiting Scrubbable Matt to complete the project, allowing extra for future touch-ups. When using more than one tin of the same colour, mix the contents together before application to ensure colour consistency.

For interior use only. Do not apply if air or surface temperatures are likely to fall below 8°C, or if relative humidity exceeds 80%, during application or drying.

1. Stir thoroughly before and during use, working through the bottom and sides of the tin to ensure an even mixture
2. Apply using a good quality synthetic brush or medium pile roller. Use a brush to cut in around corners, edges and fittings
3. For airless spray application, dilution may be required. Follow the spray equipment manufacturer's guidance
4. Apply two full coats, allowing at least 4 hours between coats under normal drying conditions at 20°C and 65% relative humidity
5. The paint is touch dry in approximately 1 hour under these conditions. Allow longer drying times in cooler or more humid conditions
6. Certain colours may require additional coats to achieve complete coverage
7. Maintain adequate ventilation throughout application and drying
8. Clean brushes, rollers and equipment immediately after use with clean water or warm soapy water, then rinse thoroughly

Please note: Allow one week for the paint to become fully cured and scrubbable. Avoid washing or scrubbing the finish before this time.

Cleaning

Allow one week for the paint to become fully cured and scrubbable before cleaning. Remove dirt and marks with a soft cloth and warm water containing a mild liquid detergent.

Maintenance

When redecoration is required, clean and prepare the surface before applying fresh coats of Crown Trade Clean Extreme Mould Inhibiting Scrubbable Matt, following the Preparation and Application instructions above.

Please note: A small amount of colour may transfer to the cloth when the surface is first cleaned. This is normal and does not affect the integrity or finished appearance of the paint film.

Does Crown Trade Clean Extreme Mould Inhibiting Scrubbable Matt prevent mould?

The formulation helps protect the dried paint film against mould growth. Existing mould must be treated and removed before painting, and any underlying damp or condensation problems should be addressed.

Is this paint suitable for kitchens and bathrooms?

Yes, its mould-inhibiting formulation and stain-resistant, scrubbable finish make it suitable for kitchen and bathroom walls and ceilings.

Can I use this paint on wood and metal?

Yes, it can be applied to suitably prepared interior wood and metal, as well as walls and ceilings. Wood and metal surfaces require appropriate preparation and priming before painting.

Can I apply it to bare plaster?

Yes, provided the plaster is sound and suitably dry. Prime porous surfaces with a mist coat of Crown Trade Clean Extreme Mould Inhibiting Scrubbable Matt diluted with 20-40% clean water by volume, following the manufacturer's instructions.

How many coats should I apply?

Apply two full coats to a suitably prepared surface. Certain colours may require additional coats to achieve complete coverage.

How long does the paint take to dry?

The paint is touch dry in approximately 1 hour and can be recoated after 4 hours at 20°C and 65% relative humidity. Allow longer drying times in cooler or more humid conditions.

When can I clean the painted surface?

Allow one week for the finish to become fully cured and scrubbable. After this time, clean with a soft cloth and warm water containing a mild liquid detergent. Its Class 1 scrub resistance makes it suitable for surfaces that require regular cleaning.

Can I use this paint outdoors?

No, Crown Trade Clean Extreme Mould Inhibiting Scrubbable Matt is designed for interior use only.