Crown Trade Clean Extreme Anti Bacterial Scrubbable Matt

Crown Trade Clean Extreme Anti Bacterial Scrubbable Matt is designed for decorating projects where hygiene and regular cleaning are priorities. It is a practical choice for care homes, healthcare settings and food preparation areas, as well as busy domestic interiors. The anti-bacterial technology works on the painted surface and supports normal hygiene and cleaning routines.

Suitability

Suitable for interior walls and ceilings, including plaster and plasterboard, alongside correctly prepared wooden doors, skirting boards, architraves and appropriately primed metalwork. It can be used on new surfaces or existing paintwork that is sound, firmly adhered and correctly prepared, allowing a consistent colour and finish across different parts of the room.

Explore other Crown Trade Clean Extreme paints for different decorating requirements.

Product Use Crown Trade Clean Extreme Clean Air Scrubbable Matt Scrubbable matt paint with air-purifying technology that helps improve indoor air quality by reducing airborne formaldehyde Crown Trade Clean Extreme Mould Inhibiting Scrubbable Matt Stain-resistant, scrubbable matt paint that helps protect the paint film against mould growth in kitchens and bathrooms Crown Trade Clean Extreme Stain Resistant Scrubbable Matt Durable, stain-resistant matt paint for busy interior areas where surfaces need regular cleaning

All surfaces must be sound, clean and suitably dry, with no dirt, grease or loose material that could affect adhesion.

1. Remove loose, peeling or poorly adhering paint and feather the edges of sound paint to create a smooth transition
2. Take special precautions when preparing pre-1960s painted surfaces, as they may contain harmful lead
3. Treat mould, algae and other organic growth with a suitable fungicidal solution, such as Sandtex Fungicidal Wash, and remove the growth
4. Wash previously painted surfaces with warm water and a suitable liquid detergent, changing the water regularly. Rinse thoroughly with clean water and allow to dry
5. Fill holes, cracks and shallow surface defects with a suitable filler, like Prestonett Ready Mixed Interior and Exterior Filler. Allow to dry, sand smooth and remove all dust
6. Wet abrade sound gloss or eggshell paint to provide a key, then rinse away residues and allow to dry
7. Prime powdery surfaces with a suitable stabilising solution, such as Sandtex Quick Drying Stabilising Solution
8. Apply a mist coat of Crown Trade Clean Extreme Anti-Bacterial Scrubbable Matt diluted with 20-40% clean water by volume to porous walls and ceilings.
9. Prime polished or dense surfaces with Zinsser Bulls Eye 1-2-3 where a water-based primer is required
10. Patch prime bare and filled areas as appropriate for the surface. Touch in any filling carried out after priming with the same primer or diluted mist coat
11. Patch persistent areas of contamination that could cause staining or bleeding with Zinsser Bulls Eye 1-2-3 Primer

Preparation for Wood and Metal Surfaces

For wood and metal surfaces, additional preparation is required:

1. On bare wood, remove dust and clean timber oils or extractives with methylated spirits. Treat knots with two coats of fresh knotting, fill defects, sand smooth and apply Crown Trade Fastflow Quick Dry Primer Undercoat
2. On previously painted wood, remove loose coatings and grey, weathered timber. Treat exposed knots, fill defects, clean and wet abrade sound paint, then spot prime bare areas with a suitable primer undercoat
3. On metal, remove rust and corrosion and apply Crown Trade Fastflow Quick Dry Primer Undercoat to bare areas. Prepare galvanised and non-ferrous metals with the appropriate treatment and primer, then apply a suitable primer undercoat as required

Always apply to a small test area first to check suitability, colour and final finish. Follow the manufacturer's instructions at all times.

Ensure you have enough Crown Trade Clean Extreme Anti-Bacterial Scrubbable Matt to complete the project, allowing extra for future touch-ups. When using more than one tin of the same colour, mix the contents together before application to ensure colour consistency.

For interior use only. Do not apply if air or surface temperatures are likely to fall below 8°C, or if relative humidity exceeds 80%, during application or drying.

1. Stir thoroughly before and during use, working through the bottom and sides of the tin to ensure an even mixture
2. Apply using a good quality synthetic brush or medium pile roller. Use a brush to cut in around corners, edges and fittings
3. For airless spray application, dilution may be required. Follow the spray equipment manufacturer's guidance
4. Apply two full coats, allowing at least 4 hours between coats under normal drying conditions at 20°C and 65% relative humidity
5. The paint is touch dry in approximately 1 hour under these conditions. Allow longer drying times in cooler or more humid conditions
6. Certain colours may require additional coats to achieve complete coverage
7. Maintain adequate ventilation throughout application and drying
8. Clean brushes, rollers and equipment immediately after use with clean water or warm soapy water, then rinse thoroughly

Please note: Allow one week for the paint to become fully cured and scrubbable. Avoid washing or scrubbing the finish before this time.

Cleaning

Allow one week for the paint to become fully cured and scrubbable before cleaning. Remove surface dirt and marks with a soft cloth and a solution of warm water and mild liquid detergent.

The anti-bacterial finish does not replace normal hygiene and cleaning routines.

Maintenance

When redecoration is required, clean and prepare the surface before applying fresh coats, following the Preparation and Application instructions above.

Please note: A small amount of colour may transfer to the cloth when the surface is first cleaned. This is normal and does not affect the integrity or finished appearance of the paint film.

What does the anti-bacterial technology do?

Crown Trade Clean Extreme Anti-Bacterial Scrubbable Matt uses SteriTouch® Silver Ion Technology to help defend against bacteria such as MRSA and E. coli on the painted surface. It supports normal hygiene practices but does not replace regular cleaning.

Is this paint only suitable for kitchens?

No. It can be used on interior walls and ceilings throughout the home, including hallways and other busy areas where surfaces need regular cleaning. It is also suitable for correctly prepared wood and metalwork.

What does Class 1 scrub resistance mean?

Class 1 is the highest wet-scrub resistance classification under ISO 11998. It indicates that the paint film withstands repeated cleaning with minimal wear, helping maintain the appearance of the finish.

Will this paint stop mould growing?

The anti-bacterial technology is designed to defend against bacteria, rather than provide a dedicated mould-inhibiting finish. For protection against mould growth on the paint film, consider Crown Trade Clean Extreme Mould Inhibiting Scrubbable Matt. Existing mould must be treated and removed before painting.

Can I apply this paint to bare plaster?

Yes, provided the plaster is sound, clean and suitably dry. Apply a mist coat of Crown Trade Clean Extreme Anti Bacterial Scrubbable Matt diluted with 20-40% clean water by volume.

How many coats do I need and how long should I leave between them?

Apply two full coats, allowing at least 4 hours between coats under normal drying conditions at 20°C and 65% relative humidity. Certain colours may require additional coats for complete coverage. Cooler or more humid conditions can increase drying times.

When can I wash or scrub the painted surface?

Allow one week for the paint to become fully cured and scrubbable. Once cured, clean with a soft cloth and a solution of warm water and mild liquid detergent. A small amount of colour may transfer during the first clean without affecting the finished appearance or integrity of the paint film.

Can I use this paint outdoors?

No. Crown Trade Clean Extreme Anti-Bacterial Scrubbable Matt is designed for interior use only. Choose a paint specifically formulated for exterior exposure when decorating outdoor surfaces.