Ciranova Fortico 1C

Ciranova Fortico 1C is a professional water-based PU lacquer designed for the protection and finishing of interior parquet and wooden floors. Suitable for residential and light commercial environments, it enhances the natural appearance of the timber while providing a durable and practical surface for everyday use. Fortico 1C can be used as both a primer and finishing coat, simplifying the floor finishing process.

Proper preparation is essential to achieve the best adhesion, appearance and durability when applying Ciranova Fortico 1C. Ensure that surfaces are clean, dry and free from dust, grease or any other surface contaminants before application.

1. Remove any existing paint, varnish, lacquer or other finish completely to expose clean bare wood.
2. Take care when working with coatings on older surfaces, particularly pre-1960s paints, as they may contain lead. If in doubt, test the coating before sanding or seek professional advice.
3. Ensure the timber is free from dust, grease and other contaminants before beginning the sanding process.
4. Sand the surface progressively using the correct sanding sequence, typically starting with 60 grit, followed by 80 grit and finishing with 100 grit.
5. For a lighter and more natural appearance, Ciranova Woodlook Plus can be used as a primer before applying Fortico 1C.
6. For floors with underfloor heating, exotic wood species or cork, the use of a suitable compatible primer is recommended to help promote adhesion and achieve an even finish.

Ciranova Fortico 1C can be used as both a primer and finishing coat and is typically applied in three coats to achieve a durable and even finish.

1. Apply the product using a brush or short-pile microfibre roller (approximately 8mm nap) suitable for water-based lacquers.
2. Apply the first coat evenly in the direction of the wood grain, spreading the lacquer thinly and evenly across the surface.
3. Allow the first coat to dry for approximately 4 hours under normal conditions.
4. Apply the second coat in the same manner as the first and allow it to dry for approximately 6 hours.
5. Lightly sand the surface using abrasive paper between P180-P220 to smooth the surface and remove any raised grain.
6. Remove all sanding dust thoroughly using a vacuum or tack cloth to ensure a clean surface before applying the final coat.
7. Apply the final coat evenly in the direction of the wood grain to achieve a consistent finish.
8. Allow the final coat to dry fully before subjecting the floor to normal use.

Drying Times

1. Lightly walkable: after approximately 12 hours
2. Fully cured: 8-10 days

To maintain the appearance and long-term performance of floors finished with Ciranova Fortico 1C, regular cleaning and periodic maintenance using compatible floor care products is recommended.

• Ciranova Hard Floor Fresh - Ideal for routine maintenance cleaning, helping to refresh the surface and maintain the protective finish.
• Ciranova Unicare X-Matt - Designed for periodic maintenance to help restore protection and keep the finish looking even and well maintained.
• Ciranova Hard Floor Cleaner - Suitable for cleaning heavily soiled floors and removing old layers of maintenance products when deeper cleaning is required.

1) What is Ciranova Fortico 1C used for?Ciranova Fortico 1C is a professional water-based PU lacquer designed for protecting and finishing interior parquet and wooden floors. It provides a durable surface suitable for homes and other areas subject to normal wear.

2) What finish does Ciranova Fortico 1C provide?Fortico 1C is available in matt and satin finishes, helping to enhance the natural character of the wood while providing a protective and easy to maintain surface.

3) Is Ciranova Fortico 1C suitable for wooden floors?Yes. Ciranova Fortico 1C has been developed specifically for parquet and interior wooden floors, offering reliable protection against everyday wear in residential and light commercial environments.

4) How many coats of Ciranova Fortico 1C are required?Ciranova Fortico 1C is typically applied in three coats. The product can be used as both a primer and finishing coat, helping to simplify the application process.

5) What is the coverage of Ciranova Fortico 1C?Ciranova Fortico 1C covers approximately 10-12m² per litre per coat, depending on the condition and absorbency of the timber.

6) How long does Ciranova Fortico 1C take to dry?The surface is typically lightly walkable after approximately 12 hours. Full curing normally takes around 8 to 10 days depending on temperature, ventilation and humidity.

7) How is Ciranova Fortico 1C applied?Fortico 1C is usually applied using a brush or short-pile microfibre roller. It should be applied in thin, even coats following the direction of the wood grain for the best results.

8) Is Ciranova Fortico 1C easy to maintain?Yes. Regular cleaning with compatible maintenance products will help preserve the appearance and durability of the finish. Periodic maintenance can also help keep the floor looking consistent and well protected.