Ciranova Woodlook Plus

Ciranova Woodlook Plus is a water based PU oil designed to protect interior wooden floors while maintaining a natural, untreated appearance. It enhances the character of the wood with a subtle, lightly bleached tone and an ultra matt finish, making it ideal for modern interiors where a raw wood look is desired.

Looking for more of an intense finish? Try Ciranova Oculto Plus or for a natural finish, try Ciranova Ecofix Plus

Ensure that surfaces to be treated are clean, dry and free from dust, dirt or any other surface contaminants.

• Ensure all existing finishes such as varnishes, oils, waxes or sealers are fully removed to expose clean, bare wood
• Sand the surface thoroughly using the correct method, starting with coarse grits such as P60-80 and progressing through to P100 grit
• Remove all sanding dust and surface any contamination, such as dirt grime,with a suitable cleaner before application to avoid imperfections in the finish
• Can be applied to sanded, planed or brushed wood surfaces, allowing flexibility across different interior flooring preparations
• Ensure the surface is evenly sanded and uniform in appearance to achieve a consistent raw wood finish

Always test the product on a small, inconspicuous area before starting to assess suitability, appearance and final finish. Always follow the manufacturer's instructions on the container.

Ciranova Woodlook Plus is supplied ready to use and can be used as both a primer and a finishing coat. Stir thoroughly before use and do not dilute. Apply in well ventilated conditions.

• Apply evenly using a brush or short pile roller, such as a microfiber roller
• Apply the first coat evenly in the direction of the wood grain
• Allow the first coat to dry for 4 to 6 hours before applying a second coat in the same manner
• After 12 to 24 hours, lightly sand using P180-220 grit to smooth the surface
• Apply a third coat to complete the finish and achieve optimal protection
• For increased chemical and mechanical resistance, Hardener Plus can be added at 10% if required

Drying Times

• Dust dry after approximately 20 to 30 minutes
• Sandable after 4 to 6 hours
• Light foot traffic after approximately 24 hours
• Fully cured after around 7 days

To maintain the natural appearance and performance of surfaces finished with Ciranova Woodlook Plus, regular cleaning and periodic maintenance using compatible products is recommended.

• Ciranova Hard Floor Fresh - Ideal for regular maintenance cleaning, helping to refresh the surface and maintain its natural, ultra matt appearance
• Ciranova Unicare X-Matt - Designed for periodic maintenance to restore protection and keep the finish looking even and consistent
• Ciranova Hard Floor Cleaner - Suitable for cleaning heavily soiled floors and removing old layers of maintenance products when required

1) What is Ciranova Woodlook Plus used for?Ciranova Woodlook Plus is designed to protect interior wooden floors while preserving a natural, untreated appearance. It is ideal for parquet and other interior wood flooring where a raw wood look is desired.

2) What finish does Ciranova Woodlook Plus give?Woodlook Plus dries to an ultra matt, invisible-looking finish with a subtle, lightly bleached tone. This helps maintain the natural character of the wood without adding noticeable sheen.

3) Is Ciranova Woodlook Plus suitable for wooden floors?Yes. Ciranova Woodlook Plus is specifically developed for interior wooden floors, offering durable protection while maintaining a modern, raw wood aesthetic.

4) How many coats of Ciranova Woodlook Plus are required?Ciranova Woodlook Plus is typically applied in three coats. This helps ensure even coverage, consistent appearance and optimal protection, particularly for floors subject to regular use.

5) How long does Ciranova Woodlook Plus take to dry?The surface is dust dry after approximately 20 to 30 minutes and can usually be sanded after 4 to 6 hours. Light foot traffic is possible after around 24 hours, with full curing achieved after approximately 7 days.

6) What does PU mean in wood oils?PU stands for polyurethane. In wood oils, polyurethane technology helps improve durability, stain resistance and overall wear performance while still allowing the wood to retain a natural appearance.

7) Can Ciranova Woodlook Plus be used as both a primer and finish?Yes. Ciranova Woodlook Plus can be used as both a primer and a finishing coat, helping to simplify the finishing process while achieving a consistent final result.

8) Is Ciranova Woodlook Plus easy to maintain?Yes. Regular cleaning with compatible maintenance products will help preserve the appearance and performance of the finish. Periodic maintenance can be used to refresh the surface as needed.