Blanchon Wood-Ageing Agent

Blanchon Wood-Ageing Agent is an odourless, water-based reactive woodstain. Chemically reacts with the tannin in the wood to provide a patina finish which highlights the woods natural grain. It's versitility allows for a wide range of decorative effects, from a light weathered look, to a darker old cottage finish. Perfect for large, open areas such as wooden floors, wooden furniture, panelling and other interior woodwork.

Please note: The best results are achieved with light-coloured European wood species such as pine, fir and spruce.

• To create pastel colours or lighter shades, blend with White or Natural, using - Blanchon Wood-Ageing Agent Effects

Ensure surfaces to be treated are clean, dry and free from dirt, dust and other surface contaminants prior to applying the reactive wood stain.

1. All previous coatings must be fully removed by sanding prior to applying this product
2. Fill any holes, splits or gaps in wooden floors with a suitable Wood Floor Filler
3. Take care to remove all traces of sanding dust from the area to be stained after sanding

To further enhance the aged look of wooden flooring prior to staining, floors can be distressed using a stainless steel or brass brush, brushing in the direction of the wood grain. This will produce fine scratches in the surface where the stain will collect.

Please Note: The use of steel wool is not recommended.

Always do a test area before starting any project to assess product suitability and final finish. Follow the manufacturer's instructions on the container at all times.

Keep any plants and aquariums away from the environment where this product is being applied.

1. Stir well before and periodically during use
2. Apply a thin, uniform layer using a synthetic bristle brush or short-haired roller, moving along the grain of the wood
3. Wipe over the surface with a clean lint-free cloth to achieve an even finish
4. If spray applying, avoid misting
5. Allow to dry for a minimum of 8 hours before applying a finishing product such as a wood oil or varnish
6. For large floor areas, a buffing machine fitted with a white or beige pad is recommended in order to obtain the
   optimum effect

Please note: The patina effect depends on the type of wood and how the reactive wood stain is applied. On delicate veneers or fragile types of wood, carry out a test on a hidden area first and before starting any project.

• To achieve a mottled effect, apply evenly, following the wood grain and allow to dry without wiping off the excess
• Add a second coat for a stronger colour

Cleaning Equipment

Wash rollers and brushes immediately after use with water. Wipe tools thoroughly after application.