Blanchon S.O. Primer

Blanchon S.O. Primer is a quick drying wood primer, for exotic and resinous parquet and other types of wooden floors. Gives a warming effect to bare wood and is particularly recommended for sealing in Blanchon Wood-Ageing Agent before the application of a top coat, such as Blanchon Wood Lacquers and Varnishes.

This product is not required if applying a solvent-based varnish or lacquer.

Surfaces to be primed and varnished must be clean, dry and free from surface dirt, dust and other contaminants prior to application.

1. Sand old or new wood flooring to obtain a smooth, even surface, first sand to bare wood with P24 or P36, then with P50 or P60 and finish with P100 or P120
2. Ensure all traces of dust are thoroughly removed with a vacuum
3. The wood floor must be perfectly clean and dry with a moisture content below 10%
4. Fill any gaps, splits or cracks with a suitable wood filler and sand smooth
5. If a colour change is desired, Blanchon Wood-Ageing Agent should be used and then allowed to dry throughly

Always do a test area before starting any project to assess product suitability and final finish. Follow the manufacturer's instructions on the container at all times.

1. Stir thoroughly before use, no thinning or diluting necessary
2. Do not apply to the wood floor if the temperature is lower than 12°C or if the relative humidity is higher than 85% do not use on wood with a moisture content above 10%. Use only in well-ventilated areas.
3. Apply with a wide brush or short hair roller in one generous, even coat
4. Allow to dry for 45 mins before light sanding
5. Remove all traces of sanding dust with a vacuum