Blanchon Universal Maintenance Oil

Blanchon Universal Maintenance Oil is suitable for the maintenance of parquet and other types of previously oiled wood flooring. Perfect for the upkeep and maintenance of floors previously treated with hardwax oils such as Blanchon Hard Wax Oil, Blanchon Hard Wax Oil Tints. Can also be used on most other floor oils.

• Need a maintenance oil for floors finished with a White, natural or Oak wood oil? Try Blanchon Maintenance Oil

Floors to be treated should be clean, dry and free from dust, dirt and any other surface contaminants.

1. Small stains and marks can be easily removed with Blanchon Natural Soap or Blanchon Lagoon Cleaner, using a well wrung-out, lint-free cloth or mop (never a soaked cloth)
2. Stubborn dirt, stains or scratches can be removed with Blanchon Powerful Cleaner and by fine sanding, if required
3. Sweep or vacuum the floor to remove all traces of surface dust, dirt and debris

Please note: Floors with heavy wear and damage should be repaired using the original floor oil or Hard Wax Oil. This product should not be used on freshly oiled floors. Allow a minimun of 14 days for Hard Wax Oils to fully cure before applying Blanchon Universal Maintenance Oil.

Always do a test area before starting any project to assess product suitability and final finish. Follow the manufacturer's instructions on the tin at all times. Blanchon Universal Maintenance Oil should be applied when oiled floors start to show signs of wear and tear such as dull patches and minor surface scratches.

Do not apply if the temperature is below 12°C and use only in well ventilated areas. Keep any aquariums and plants away from the environment where the product is being applied. This product is ready to use. Do not dilute.

1. Shake well before and during use
2. Apply thinly in the direction of the wood grain with a microfibre mop or cloth
3. Remove any surface oil immediately after application with a clean, lint free cloth or mop
4. Small localised areas can be touched up using a cotton cloth to apply and polish
5. The use of a buffing machine is neither necessary nor recommended

Please note: This oil dries very quickly, it is therefore important to remove any excess surface oil as you go, so as not to spoil the finish.

Cleaning Equipment

Clean applicators immediately after use with water. Wring out cloths and wipe tools thoroughly after application.

After Use

Take reasonable precautions during the first hour following application:

• Floor can be used again after 20 minutes
• Protect the floor using felt pads underneath table and chair legs
• If necessary, a good quality mat placed at the entrance will retain dust and grit
• Wipe down any water or other liquid spillages immediately and take particular care with flower pots
• Do not move heavy furniture around
• Remove dust with a vacuum or broom - do not use colour impregnated fabrics

Regular Cleaning

Floors can be regularly cleaned with a vacuum cleaner and using a dampened, lint-free cloth or microfibre mop with Blanchon Natural Soap or Blanchon Lagoon Cleaner. Do not use household detergents or bleaches as these will degrade the finish.

Allow at least 7 days after the finishing coat has dried before cleaning the floor for the first time.

Maintenance

If floors begin to look worn or tired over time, simply apply a fresh coat of Blanchon Universal Maintenance Oil, following the Preparation and Application instructions above.

Repair

Lightly sand the damaged area using fine-grade sandpaper before applying 1 or 2 thin coats of Maintenance Oil with a clean, lint-free cotton cloth.