If your kitchen is anything like most people’s, it’ll be a busy, bustling place full of action and fun, food preparation, pets and children. Over their lifetime, kitchen units come in for a proper bashing, and wood kitchen surfaces are some of the most vulnerable as well as the most beautiful.
Here’s how to maintain your wooden kitchen units and worktops, plus a few key product recommendations to help you transform your wooden kitchen surfaces from tired and worn into something that glows with beautiful health.
Because it’s a kitchen, we’ve recommended products that are non-toxic and completely food- and child-safe. Get it right and your kitchen units will look better and last longer – which is very good to know when replacements can easily cost thousands.
Kitchen surfaces – varnished or oiled?
Knowing if your kitchen cupboards, cabinets and worktops are oiled or varnished is fairly important, as the way they are cleaned and maintained can be very different. As a general rule, varnished surfaces are more durable and can withstand more in the way of household cleaning products. Oiled surfaces are more sensitive to the types of products used for cleaning (a little oil can be removed after each clean), but are generally much easier to maintain and repair than varnish if they become worn, scratched or dull-looking.
How to maintain your wooden kitchen cabinets
Kitchen cabinet maintenance tip 1: Regular dusting and grease removal – As a general rule, the longer you leave your kitchen surfaces to get sticky and dusty, the more difficult it is to clean them. If the wood just needs dusting and buffing, use a soft, dry cloth. And do it as often as you can. Otherwise, the grease and steam that are so typical in kitchens will do their best to glue any dust and grease fast onto your surfaces, making cleaning more of a challenge as time goes by and the muck builds up. Try to give your cupboards a wipe-down at least once a week.
Kitchen unit cleaning tip 2: Ongoing TLC – If you want to keep that lovely natural, clean finish, it’s a good idea to wipe down and polish your kitchen cabinets at least once every few months, ideally more often, especially if you have a busy kitchen.
Kitchen cupboard cleaning tip 3: Thorough degreasing – As noted, kitchen grease can tend to build up, especially if you cook a lot of greasy food. And grubby fingerprints will tend to accumulate on doors. You can remove most of those greasy fingerprints and stains from your kitchen cupboard doors with a soft, damp cloth and some wood surface cleaner, which will help to cut through the dirt and grease. It’s best to go for a proper wood surface cleaner and to avoid harsh supermarket cleaning products, as these may mark, stain or strip away oiled surfaces.
How to maintain your wooden kitchen worktops
Kitchen worktop maintenance tip 1: Seal that surface! – It’s important to protect your kitchen worktops from the effects of moisture, so you need to make certain that your wood surfaces are well protected with a wood oil or varnish so that moisture cannot penetrate into the timber.
Kitchen surfaces tip 2: Get rid of heavy dirt – For varnished surfaces, you can use a mild soap solution to gently clean off heavy grease and dirt from your kitchen surfaces. Pay attention to those corners and edges, especially those hidden behind jars and containers. A mild detergent will cut through the grease and reveal the underlying wood without causing damage. A small drop of mild washing-up liquid is often enough to get rid of build-ups. Test a small area first to make sure the varnish – if there is any – doesn’t go milky. If it does, use a proper surface cleaner suitable for varnished surfaces. Wipe over with a damp cloth (never with large amounts of water), then dry the surfaces immediately.
Kitchen worktop cleaning tip 3: Baking soda – Good old baking soda is an excellent product for cutting through stubborn kitchen grease. Try using it to scrub away the grease that can build up in those hard-to-reach areas and in the corners. It will effectively remove greasy residue without harming the wood finish.
Kitchen maintenance safety tips
Natural turpentine is a big no-no for varnished surfaces because it leaves a horrible sticky residue. And both mineral spirits and synthetic turps are flammable and therefore dangerous in a kitchen environment. It’s best to avoid both.
Sugar soap will shift stubborn grease like magic, but you risk damaging the varnish or other finish if you leave it on for too long, so you need to take great care to avoid damaging the surface finish. If your wooden kitchen units are really filthy and you feel you need to use sugar soap or something even more drastic, test a small area first.
Wooden kitchen units don’t tend to respond well to harsh detergents, soap pads or steel wool, all of which can easily ruin the surface. It’s also best to avoid paste waxes and silicone-based products, where the eventual build-up of wax, which is desirable on other wood furniture, can attract dust.
You should always make certain that any wood finishing products that you intend to use in your kitchen are food-safe. We are careful to ensure that the products that we offer for use in kitchens are food-safe.
What to do about horribly stubborn grease?
Anyone who has had to clean the kitchen of a house previously occupied by students will know how difficult it can be to remove the grease that builds up when a kitchen is not routinely cleaned. Here’s what one keen DIYer recommends on the Money Saving Expert website:
“I have always been lucky with Fairy Power Spray. I have certainly used it on cupboards, dishes, hob, blinking everything I love it so much. It is remarkable at getting rid of grease (makes cleaning the chip pan a relative doddle.)
I would not spray it on and leave it to soak. If they are as bad as they sound I would buy a few rolls of kitchen roll (sorry to all the eco people out there but it’s a lot easier with grease than a cloth) and try and wipe down the doors till you can get as much off as you can. If it’s stuck fast, I would wipe over first with an old cloth soaked in very hot water to loosen it. Once I had done this and the doors were relatively clean apart from being oily to touch, I would spray some Fairy in a bucket, get a few cloths and start wiping and scrubbing. If you’re worried about the varnish, wipe over with a clean cloth and clean hot water to rinse. Elbow grease is an effective remedy for kitchen grease!
Perhaps someone will come along and tell me I have it all wrong, and it will ruin the varnish after all – but I’ve never had problems with it.”
What if my kitchen units are completely knackered?
If your wooden kitchen units have gone too far down the road to hell, completely beyond redemption, you could always consider degreasing and then sanding them right back to the naked wood and then painting them with a gorgeous fresh finish.
Recommended kitchen cabinet finishes for wood kitchen units
We stock an impressive and varied choice of top-quality kitchen cabinet finishes. You might fancy a stunning opaque finish or a lovely, clear, natural look. Either way, we’re here to make maintaining your wood kitchen cabinets as easy as possible. If you need advice, why not give us a call? We’re always pleased to give sensible expert advice. In the meantime, why not take a look at these?
- Fiddes Hard Wax Oil Tints – Hard-wearing, easy to apply to bare wood, easy to maintain, with a fabulous satin finish, and ideal for colouring and protecting any interior wood. It’s child-safe, fast-drying and comes in nine lovely shades.
- Manns Classic Oak Stain – Most kitchen units come in oak, a highly durable and attractive wood. Manns Classic Oak Stain is popular because it’s water-based and kind to the environment, offering superior colour depth and a stunning, crisp grain. It’s perfect for oak and other hardwoods including ash, beech and mahogany and can be easily overcoated with either a varnish or oil.
For a full range of cleaning, maintenance and renovation products, see our worktop finishing products and kitchen cabinet finishing products.
Wooden worktop help and advice
Need some help with your wooden kitchen worktop surfaces? Need specialist help and advice? Contact our resident experts, who are on hand to provide free advice on how to clean, maintain and restore all manner of wooden worktops and worktop finishes.
Your tips for kitchen cabinet grease removal?
There are all sorts of weird and wonderful tips for removing grease from kitchen cabinets. Have you discovered the easiest way to banish the grease and maintain a beautiful wood finish? If so, we’d love to hear about it. Feel free to comment.
63 comments
Hi. I do a lot of cooking and have pine work tops. The oil I used lasted no time at all. Can you recommend a product please?
I’d like to keep the natural colour.
Reply to Gail:
Hello Gail,
I would recommend having a look at the Manns Premier Top Oil (https://www.wood-finishes-direct.com/products/manns-premier-top-oil). This is a hard wearing and durable oil that will give good protection to your work top. I would recommend removing the existing oil for the best finish. It is easy to apply, only requiring two thin coats of oil and then to maintain just give a top up coat when you feel the wood needs it.
This can be annually or longer depending on how much the surface gets used, but simply clean the surface by wiping with White Spirit (https://www.wood-finishes-direct.com/products/barrettine-white-spirit) and then re-oil. Any stains or marks can be easily repaired, just lightly sand the effected area and re oil. We have some very helpful videos on our YouTube Channel (https://www.youtube.com/channel/UC7-tgwbsUxm73aVnAjLGHRA) that give great hints and tips. If you have any further questions please do not hesitate to give us a call (https://www.wood-finishes-direct.com/pages/contact).
kind Regards Sam.
Thanks so much for your prompt reply :)
Hello Sam
I have a small Ikea untreated birch kitchen island and decided to apply a coat of Osmo top oil clear, however, I’m not keen on the light finish of the wood standing next to another unit that has an old pine surface. Am thinking a Fiddes hard wax oil tint perhaps? Would you recommend this or something else? I assume I will need to sand the island surface again – do I need to use white spirit on it prior to sanding? Thanks for any advice!
Kind regards
Caroline
Reply to Caroline Soer:
Hello Caroline,
Its quite possible that you will be able to apply over the Osmo Oil, now, the manufacturers will not recommend this and so there are not guarantees. But generally speaking one oil will go over another with out any problems. And if you have only applied one coat of the Osmo then chances are the wood will absorb another coat of an oil.
So a test area is the first step. A small inconspicuous area to check that you like the colour that will be achieved and that there are not adverse reactions between the two products. If all goes well with the test then full application can be done. If you haven’t already seen our YouTube Videos (https://www.youtube.com/channel/UC7-tgwbsUxm73aVnAjLGHRA) there are some helpful tips for application of oils and if you have any further questions please feel free to give us a call (https://www.wood-finishes-direct.com/pages/contact) and one of our advisers will be happy to help.
Kind Regards Sam.
I have had my solid oak work tops for 2 years they were well oiled and still look great apart from a small area around the sink. It has discoloured and gone rough. Do you think this is water damage and can it be rectified with sanding and re-oiling?
Reply to Pam:
Hello Pam,
It is likely to be water damage yes. When the wood soaks up water or liquid it can raise the grain and that may be the rough effect that you can feel. Your best option is as you have suggested to sand back and re oil the area. The good thing about the oil is that it does blend fairly well. I would also recommend Osmo Wood Protector (https://www.wood-finishes-direct.com/products/osmo-wood-protector) around the sink area as this will protect the wood that bit more from temperature and moisture. One coat of the protector and 2 coats of the Oil. If you have any further question please let me know, and my apologies for the delay in getting back to you.
Kind regards Sam.
I have mahogany worktops that have faded in parts (possibly due to cleaning materials/bleach)
What is the best method of cleaning this up and regaining the dark wood colour..and maintaining it. Will i need to dye parts?
Reply to Venetia Peet:
Hello,
How to repair this could depend on the wood and the previous treatment that is on the wood. If you would like to forward some images to wood@finishes.direct and I will be happy to take a look. If you not sure which product is currently on the worktops, you can do a small test with some oil from the kitchen cupboard. A couple of drops on the surface of the wood left for around and hour, if the oil remains unmoved then you have a seal like varnish on the surface. If the oil moves or soaks in then you have an oil based product on the wood.
All the Best Sam.
Hello, what product would you recommend to get the finish on a worktop like the one in the picture above Kitchen Maintenance. Thank you