Barrettine Mould Stain Cleaner Spray

Name: Barrettine Mould Stain Cleaner Spray
Rating: 4.33 (6 reviews)

4.3/5 (6 reviews)

£9.10

Quantity

2 in stock.

An effective spray for the control of mould spores, algae and fungi

Features

An effective mould cleaner spray for the control of mould spores, algae and fungi
For use on most surfaces, including grouting and worktops
For interior and exterior use
Ready-to-use from the container
Low odour
Low VOC

Brand

Barrettine

Drying time

24 hrs

No. of coats

2 coats

Size

500ml

MPN

Please make a selection

GTIN

Please make a selection

Overview

Barrettine Mould Stain Cleaner Spray cleans and bleaches stains caused by mould spores, fungus and algae from most surfaces including grout and the surface of silicone seals and other damp areas. Once cleaned and with regular use it will help prevent re-growth and the reappearance of fungal stains. It has a 360 degrees head for ease of use and gives accurate spray action.

Please note: This product was previously called Barrettine Mould and Mildew Spray, however the formula remains unchanged.

Looking to clean bigger areas? Try the 4L Barrettine Mould and Mildew Cleaner

Preparation

Before applying Barrettine Mould Stain Cleaner Spray, remove as much surface dirt, debris and organic growth as possible with a scraper, stiff brush or broom. For maximum biological effectiveness, it is recommended that this product is applied to dry surfaces.

Application

Always do a small test area before starting any project to confirm performance and follow the manufacturer's instructions on the bottle at all times. Only use Barrettine Mould Spray when the surface and ambient air temperature is above 5°C.

Spray mould remover spray evenly over the surface to be treated
Leave for up to one hour
Using a brush, scrub the area to release dirt and grime
Rinse thoroughly using water and a sponge
Stubborn stains and most silicons or elastic grouting will require a longer period of mould treatment

FAQ

How would I wash this product off when using it inside?

We would recommend using a sponge or a mop.

Datasheets

Safety Information

5 stars: 2 (33%)
4 stars: 4 (67%)
3 stars: 0 (0%)
2 stars: 0 (0%)
1 star: 0 (0%)

It worked pretty well

It improved mould between grout on my tiles but couldn't shift the mould stains on contaminated paintwork (they are quite troublesome)

Excellent

I was advised to use this by the wood finishes direct team on floorboards that were damp and mouldy prior to staining and varnishing. You could see a black stain mould on the floorboards even after I sanded them. I was a bit concerned that the product could stain them in some way, it did make them a slight yellow colour in areas as I only treated one area of the floor, by a bay window. The team advised me to slightly sand over before using Manns Classic Pine stain. Once stained you couldn't even notice it, floor has come up a treat!

Easy to use and works

Pleased so far. It has meet its match with ingrained mould in wood, though even here it has had some positive effect.

Hope it will work

It's difficult to judge something like this product so early. I hope its action against mould will work for long. So far so good btw. It has a very strong bleach apparently so be careful which clothes you are going to dress while using this product

Does the job.

Used this on my shed which had a few areas of green mould. Sprayed on and left for about an hour before brushing the areas and then washing. All the mould had disappeared leaving it ready for preserver.