Zinsser Mould Killer and Remover Spray

Zinsser Mould Killer and Remover is ideal for cleaning and protecting against mould on interior surfaces and also as a pre-treatment for surfaces that have developed mould, algae or fungi, prior to the application of a Zinsser Stain Block, Primer and Sealer or paint finishes. It contains a fungicide which kills mould and removes the dark stains caused by mould and fungi growth.

Before applying Zinsser Mould Killer and Remover, remove as much surface dirt, debris and organic growth as possible with a scraper, stiff brush or broom.

Always do a small test area to assess performance and compatibility. Follow the manufacture's instructions on the container at all times.

1. Spray mould remover spray evenly over the surface to be treated
2. Leave for 5 minutes, then wipe the surface using a dampened lint-free cloth or sponge, wiping away the mould
3. Once the mould has been removed, wipe off any residual grime with a clean, damp cloth

Cleaning Equipment

Rinse cloths or sponges in warm, soapy water after use.

Can I wallpaper a wall after Zinsser Mould Killer Spray has been applied?

Yes, as long as the mould has been removed, you have wiped off any residual grime with a clean, damp cloth and degreased the surface using Zinsser Universal Degreaser and Cleaner

Can Mould Killer be used on artex?

It can be used on sealed (painted) Artex but not Artex that is unsealed.