Sikkens Cetol TSI Satin Plus

Name: Sikkens Cetol TSI Satin Plus
Rating: 4.87 (55 reviews)

4.9/5 (55 reviews)

Colour

Colourless - 003 E5.58.44T

size

1L 2.5L

From £28.38

Quantity

A medium-build solvent borne interior varnish that is resistant to knocks, spills and abrasion.

Features

A high quality, solvent-based interior wood varnish
Perfect for skirting boards, doors, architraves and domestic flooring
Resistant to knocks, liquid spills and abrasion
Dries to a satin finish
High VOC

Brand

Sikkens

Drying time

16 hrs

No. of coats

3 coats

Size

1L, 2.5L

MPN

Please make a selection

GTIN

Please make a selection

Overview

Sikkens Cetol TSI Satin Plus is a medium build lacquer designed for smooth wooden surfaces such as doors, architraves, skirting boards, panelling, picture frames and more. For a water-based alternative for skirting boards, doors and other interior trim, try Sikkens Cetol BL Unitop.

The colourless version of this product is clear, however, it may enhance the natural colour and grain of the timber when applied.

Preparation

Ensure the timber surface is clean, dry and free of dust, dirt, wax and grease prior to application. The timber should be allowed to acclimatise to its end-use environment. Moisture content should not exceed 14%.

Bare or New Timber

Degrease any exposed bare timber surface by wiping with a soft, lint-free cloth dampened with methylated spirits
Allow solvent to evaporate fully before over-coating
Any resinous deposits should be removed with a scraper
When filling, be sure to use a designated wood filler, as general or all purpose fillers may not be suitable
Do not use Sikkens TSI on substrates or wood preservatives which have water-repellent properties i.e. products or timbers that contain wood oils or waxes

Previously Coated Timber

Denib using a fine grade nylon abrasive pad or a fine grade (P240 or finer) wet or dry silicon carbide abrasive paper, in the direction of the grain, ensuring not to break through the surface coating
Remove all traces of sanding dust
Where there is localised damage, or deterioration has occurred as a result of exposure of the factory coating for longer than 3 months, affected areas should be thoroughly sanded back to a sound substrate

Old Timber

Damaged or decayed timber must be removed and replaced, cutting at least 25mm into sound timber

Application

Always do a test area before starting any project to assess product suitability and final finish. Follow the manufacturer's instructions on the tin at all times.

Sikkens TSI is ready-to-use from the tin. Do not thin. Only apply in temperatures ranging between 5°C to 30°C. Stir thoroughly before and during application. This product is not suitable for spraying.

Apply Cetol TSI with a good quality, long haired, natural bristle brush.
Apply in a full flowing coat, laying off in the direction of the grain, using the minimum number of brush strokes necessary
Allow 16 hours to dry between each coat
Apply second and third coat as above

Aftercare

Regular Cleaning

For regular cleaning, wipe wood surfaces with a lint-free cloth and warm water.

Repair

Lightly sand with a fine grade abrasive paper to keep splinters and rough edges away
If the timber has been stained, lightly sand but avoid sanding back to underlying stain
Remove all dust thoroughly and apply 1 or 2 coats of Sikkens Cetol TSI Satin Plus

FAQ

Would the Cetol TSI Satin Plus in Light Oak 006 be suitable for a cream painted high gloss cabinet?

We would recommend using a water-based varnish instead. Oil-based varnish will likely discolour the paint. Take a look at Smith and Rodger Rocktop Multi-Surface Clearcoat which is specifically designed to sit over paint work and give a tough, durable, clear coating over the surface.

Can the TSI Satin Plus be applyed over white paint?

As this is a solvent-based varnish, it will likely yellow over the white paint. We would recommend looking at a water-based varnish instead such as Sikkens Cetol BL Unitop.

Can I put the Sikkens Cetol TSI varnish on my previously varnished floor or do I need to sand it all back to bare wood?

If the old finish is in good condition, lightly sand to provide a key and apply the Sikkens Cetol TSI Satin Plus as above. If there are areas of peeling, flaking or cracking, sand the previous coating off, back to bare wood before applying.

Datasheets

Safety Information

5 stars: 49 (89%)
4 stars: 5 (9%)
3 stars: 1 (2%)
2 stars: 0 (0%)
1 star: 0 (0%)

Great product

It is very easy to use. It does an excel job

Perfect service and product!

After having had new ash stairs case fitted I wanted to highlight the wood grain and protect the wood. The staff were very helpful on advising me how much I would need and which varnish to use. I would definately use this company again. Thanks you!

Excellent product.

The TSI is a newer type of the much older TS, which was amazing for interior handrails and the this newer type seems to be equally as good. It is easy to apply, doesn’t dry too quickly and the brushes can be cleaned with white spirit.

Very good quality product

Excellent quality, easy to use with pleasing result

Great recommendation and product

Telephoned customer service to enquire about a suitable product to stain my staircase, and the lady was very informative on their range of products and recommended the Sikkens Satin plus. Completed the job and superb stuff, stains well with a couple of coats and looks fabulous.

High quality

Excellent coverage and good stain colour also easy to apply

Ideal product to treat new wooden veneered doors

I have bought 3 cans in separate orders to varnish 17 wooden veneered doors and found it an excellent product.

Perfect long lasting finish indoor and out products

I have been using the Sikkens range indoors and out for 30 years and the quality and durability is excellent

Excellent

Easy to apply and 3 coats gives a really good finish

Great service

Have used product before, does a good job. Very quick delivery and was kept informed with progress of order.

Quality product

Replacement for previous tin - typical Sikkens quality

Great varnish

Itâ€™s a second time we bought this product, not disappointed

I always use Sikkens products on wood. It's the best.

I never use any other product other than Sikkens for wood. I was pleased with the price and the very prompt delivery. Would definitely use Wood Finishes Direct again.

Worked as expected.

Applied to a sitting room floor easily and dried to a rich finish. So far seems to stand everyday wear, and bears furniture OK.

Good quality product

Good quality product, our floor looks as good as new.

Excellent

Excellent product easy to apply giving a good finish

Excellent

Have used this product for 20 years since house was built on the advice of our builder. Will carry on using both Sikkins interior and exterior.

I've already bought another; this is the second I've had from Wood Finishes Direct

Easy to use, excellent coverage, lovely sheen, really brings oak alive!

Works well - but beware how multiple layers change the colour result

Good stuff, but I used 3 layers of this on my first couple of doors and the result is not Light Oak after that! My fault for not testing enough! Best result was with 1 layer of Light Oak and 2 of Colourless on top, looks lovely.

Excellent long lasting product

I bought this to recoat some internal oak doors and window cills which we last coated with the original Cetol product about 15 years ago. Still looking good, hope it lasts as long.

Simply the best

As with all sikkens products I have used in past and present, I wouldnâ€™t consider using anything else, have used various other products, only to be sorely disappointed. So as the saying goes, stick to what works for you and thatâ€™s exactly what I will do. Sikkens and only sikkens for me.

Top notch product, it's a joy to work with.

It worked well on my internal hard wood window frames, this product gives the whole room a lift, it's marvellous .

Goes on easy - looks good on doors.

Stained 15 doors using this product. Found it very easy use.

Good colour but not easy to apply

I found this product quite difficult to apply due to it's thick consistency. Spoke to the supplier who suggested the product is sensitive to temperature and could have been too cold. As it's winter and we've had a very cold spell this may be a valid reason.

Excellent

Used Sikkens for years. Best woodstain products on the market - by far.

Excellent Coverage

It is as good as its reputation. Needs to be at room temperature to aid brushing. Not cheap but you get what you pay for in this life. I have some doors that I Sikkens'd over 6 years ago and they still look good as new...despite small dogs trying to paw them open!

have used it previously . local supplier no longer stocks it

just as product describes easy to apply , dries quickly

Colourless perfection

If you want a colourless finish that enhances the timber. It is however of a thick consistency and better applied above 10 degrees alternatively keep in warm room prior to application. Excellent product . Time spent on preparation produces brialliant results.

great product

great finish ,even thou stated as clear dries with a darker golden finish , take your time , i found taking the doors of and laying them on a flat table or bench and flat back the door in between coats !

Colourless product great finish

Thicker than normal, workability better when warm. Outstanding finish on prepared wood

Good finish

A lot thicker to apply than other Sikkens products I have used so tricky to apply thinly. Hardens off well and reasonably quickly if applied thinly. I found that if tin was warmed it thinned a little. Cleaning brushes was difficult and only achieved by having several pots of white spirit used in succession. Still pleased with the finish though, only 11 doors to do.

Perfect

I did my research and it paid off. We have 10 solid oak interior 1930s repro doors being hung in a renovation. Using this product has enhanced their natural warmth and beauty. Quick and easy to apply and very economical. Just about to use it on oak handrail too. I can’t wait!