Sandtex Fine Textured Masonry Paint

Sandtex Microseal Fine Textured Masonry Paint is a durable exterior wall coating designed to protect and refresh weathered masonry surfaces. Its breathable Microseal technology helps prevent water ingress while allowing trapped moisture to escape, helping reduce peeling, blistering and flaking caused by harsh weather conditions. Suitable for most sound, dry exterior surfaces including render, roughcast, pebbledash, concrete, stone and previously painted masonry surfaces.

The fine textured matt finish helps disguise minor surface imperfections, uneven render and weathered exterior walls while adding subtle texture and character to the surface. Designed to withstand the changing UK climate, it provides a durable, dirt resistant and waterproof coating with up to 15 years guaranteed protection for long lasting exterior performance.

Prefer a smoother, more contemporary appearance? See Sandtex Smooth Masonry Paint for the same durable exterior protection with a flat smooth finish.

Choosing the Right Colour

Exterior colours can appear very different depending on lighting conditions, surrounding buildings and surface texture. We recommend testing your chosen shade in a small, inconspicuous area before starting your project to check the final appearance throughout the day.

For the most accurate result, view the colour during bright daylight, overcast conditions and late afternoon light, as exterior colours can appear lighter or darker depending on the weather and time of day.

All surfaces must be sound, clean, dry and free from dirt, grease, dust and loose material that may affect adhesion. Proper preparation is essential to achieve a durable, even textured finish on exterior masonry surfaces.

• New render, concrete and masonry surfaces should be fully cured and completely dry before painting
• Remove all loose, peeling or flaking coatings by scraping and brushing with a stiff bristle brush
• The fine textured finish is ideal for older masonry, rough render and slightly uneven exterior surfaces where a smoother coating may highlight imperfections
• Treat mould, algae and organic growth with a suitable mould and mildew cleaner before painting
• Weathered, chalky and porous surfaces should be brushed down and treated with a suitable stabilising solution, such as Sandtex Quick Drying Stabilising Solution before application
• Due to the textured finish, coverage rates may vary depending on surface texture and porosity

We recommend trialing a test area before starting your project to check suitability, coverage and final finish. Fine textured coatings can appear slightly different depending on surface texture, lighting conditions and application method, so testing in an inconspicuous area is always recommended. For consistent colour, intermix packs before application if using more than one batch.

For best results, apply in dry conditions when temperatures remain above 8°C during application and drying. Do not apply during rain, frost or damp conditions, or if temperatures are likely to fall below 8°C before the coating has fully dried.

Please Note: This product is not suitable for common, fletton or engineering type bricks.

• Stir thoroughly before use and periodically during application to maintain an even textured consistency and colour.
• Apply evenly using a good quality masonry brush or long pile exterior roller suitable for textured masonry coatings.
• Apply 2 full coats to achieve a durable, waterproof and evenly textured finish.
• Allow approximately 3-4 hours drying time between coats under normal drying conditions.
• Additional coats may be required on highly porous surfaces or when covering darker colours.
• Clean brushes, rollers and equipment with clean water immediately after use.

To help maintain the appearance and long term durability of exterior masonry surfaces, regularly remove surface dirt, traffic film, algae and organic growth using a soft brush and a suitable exterior masonry cleaner. Routine cleaning will help preserve the textured finish and keep exterior walls looking fresher for longer.

Inspect exterior surfaces periodically for signs of damage, movement or weathering, particularly on older render, roughcast and exposed masonry surfaces. Any loose or damaged areas should be repaired before applying additional coats of Sandtex Microseal Fine Textured Masonry Paint to maintain a consistent textured finish and long lasting weather protection.

Can Sandtex Microseal Fine Textured Masonry Paint be used on previously painted surfaces?
Yes, it can be applied to most previously painted exterior masonry surfaces provided they are sound, clean, dry and free from loose or flaking material.

What surfaces is Sandtex Microseal Fine Textured Masonry Paint suitable for?
It is suitable for most exterior masonry surfaces including render, roughcast, pebbledash, concrete, building blocks and facing bricks.

Does the textured finish help hide uneven walls?
Yes, the fine textured finish can help disguise minor surface imperfections, uneven render and weathered masonry surfaces better than a smooth masonry coating.

Is Sandtex Microseal Fine Textured Masonry Paint waterproof?
Yes, once dry it forms a waterproof, breathable and dirt resistant coating designed to protect exterior masonry surfaces from harsh weather conditions.

How long does Sandtex Microseal Fine Textured Masonry Paint take to dry?
Under normal drying conditions it is typically touch dry and ready for recoating after approximately 3-4 hours. Drying times may be extended during cooler or damp weather.

Can Sandtex Microseal Fine Textured Masonry Paint be sprayed?
The manufacturer recommends application by masonry brush or roller. Due to the textured finish, spray application may not be suitable for all equipment types.

Can this paint be used on common or engineering bricks?
No, Sandtex Microseal Fine Textured Masonry Paint is not suitable for common, fletton or engineering type bricks.