Ronseal Stays White One Coat Non Drip Paint

Ronseal Stays White Non Drip One Coat Paint is a non drip paint for interior wooden surfaces. It is well suited for jobs that need doing in a hurry and for tricky, awkward to paint surfaces, such as vertical stair spindles. It's also ideal for use on interior wooden doors, window frames, skirting and trim.

Please Note: It's important that this product is not stirred prior to application. Stirring changes the physical properties of the paint making it runny therefore no longer 'non-drip'. It is recommended that this paint is allowed to settle for at least 6 hours following transit so that it can return to its thick, gel like consistency.

• Looking for an extra durable paint for interior wood and metal surfaces? Try Ronseal Stays White Ultra Tough Paint
• Looking for an all-in-one primer and paint? Try Ronseal Stays White 2 in 1 Primer and Paint

Ensure that wooden surfaces top be treated are clean, dry and free from dirt, dust and any other surface contaminants. Make sure the room temperature is above 10°C. Put down dust sheets to cover any areas that do not need painting.

1. Lightly sand wood using 120 grit sandpaper in the direction of the wood grain to give it an even finish
2. Vacuum and wipe wood over with a lint-free cloth dampened with white spirit, being sure to remove any sanding dust prior to painting
3. Any instances of wet rot should be treated with Ronseal Wet Rot Wood Hardener, and any existing woodworm can be eradicated with Ronseal Woodworm Killer
4. Fill any holes or cracks in the wood with Ronseal High Performance Wood Filler or Ronseal Multi Purpose Wood Filler
5. Particularly knotty softwoods should first be treated with Ronseal Knot Block Wood Primer And Undercoat
6. For hardwoods which are less prone to knots, prime wood with Ronseal One Coat Wood Primer and Undercoat

Always do a small test area before starting any project. Follow the manufacturer's instructions on the tin at all times. Ronseal Stays White One Coat Non Drip Paint does not require stirring.

1. Apply straight from the tin. Do not stir or shake prior to application
2. Using a good quality synthetic brush, apply a generous coat in the direction of the wood grain
3. Paint will be touch dry in 1 - 2 hours