Ronseal Quick Drying Stain Block Aerosol

Ronseal Quick Drying Stain Block covers nicotine, ink, crayon, grease and more. It can be used as a base coat before over coating with a suitable wall or ceiling paint.

Please Note: This product is not suitable for use on wood. It is strictly for plaster walls and ceilings.

• Need a brushable stain block in a standard tin. See Ronseal One Coat Stain Block

Ensure surfaces to be treated are clean, dry and free from any surface contaminants.

• Put down dust sheets to protect anything you don't want to get paint on
• Mask the surrounding areas to avoid over-application
• Open doors and windows to allow for good ventilation
• If any mould is present treat with Ronseal 3-in-1 Mould Killer
• Repair any holes, cracks and imperfections with Ronseal High Performance Wood Filler or Ronseal Multi Purpose Wood Filler
• Lightly sand down rough areas and remove any sanding dust

Always do a small test area to assess colour and compatibility of the finish. Follow the manufacturer's instructions on the tin at all times. Make sure room temperature is above 10°.

1. Shake the can until you can hear it rattle, then keep shaking for 1 minute
2. Hold can upright, 20 - 30cm away from the wall or ceiling, spraying horizontally to ensure an even finish
3. Apply 2 - 3 coats, allowing 10 minutes between each coat
4. Leave to dry for 24 hours before applying a suitable top coat

Cleaning Equipment

Turn the can upside down and spray for a few seconds, then wipe nozzle with a damp, lint-free cloth.