Repair Care DRY FLEX SF

Repair Care DRY FLEX® SF is a very quick drying, epoxy repair compound for both permanent and fine surface spot repairs on interior and exterior wood surfaces, such as weathered timber, cracks, screw and nail holes. Ideal for small, quick repairs with a thickness level of 0-6mm. It can be sanded and finished to match the surrounding area after 30 minutes. Solvent free and easy to use.

• In need of a filler for small to medium repairs? Use Repair Care DRY FLEX 4 or Repair Care DRY FLEX 4 2-in-1
• Looking for a filler for large repairs? Try Repair Care DRY FLEX 16

Ensure that areas to be filled are clean, dry and free from surface dust , debris and coatings, removing any damaged and rotten wood from the area.

Always do a small test area before starting any project to assess performance and end result. Follow the manufacturers instructions on the container at all times.

Optimum application is achieved between 0°C and 30°C with good air movement and ventilation.

1. Insert into the Repair Care EASY.Q Professional Dispensing Gun
2. Dispense the tube onto a Repair Care EASY.Q Mixing Plate and mix using a Repair Care EASY.Q Steel Application Knife, until it reaches a uniform colour
3. Spread the mixture thinly across the mixing plate, as this will extend the application period
4. Using the metal knife, apply the coating to the prepared area, leaving the surface smooth
5. Allow 30 minutes to fully cure

Please Note: Always wear suitable Protective clothing, goggles and Repair Care EASY.Q Disposable Nitrile Gloves.

How long will a repair last if I used Repair Care?

The Repair Care products are fantastic quality and with the correct preparation and application, DRY FLEX® repairs will last for the lifetime of the substrate. The repairs will also significantly extend redecoration cycles.

Can I use this to repair small cracks in/ around other Dry Flex filler?

Absolutely, the DRY FLEX® SF, a spot repair product formulated to bond to existing DRY FLEX and also substrates.