Polyvine Multi-Surface Lacquer

Polyvine Multi-Surface Lacquer is a perfectly clear, water-based, acrylic varnish for a wide variety of interior and exterior surfaces. This includes wood, non-ferrous metal, laminate, tile, ceramic, glass and plastics. It has excellent resistance to heat, water and stains. It has great sanding properties for an even better finish. Polyvine do state though this cannot be used on uncoated exterior wood.

Please note:

• Polyvine Multi-Surface Lacquer is a rebranding of Polyvine Crystal Clear lacquer. The formulation has remained unchanged.

Whilst this product is a perfectly good finishing coat that producing one of the clearest, shiniest gloss finishes on the market, it can also be used as a multi-surface primer. Some examples of how it can be used in this way can be found below:

• Priming and sealing galvanised metal, ready for a top coat of suitable paint
• Priming melamine or laminated surfaces before painting
• Priming tiles before re-painting, or upcycling
• Can be used to prime and seal MDF
• Priming most other difficult substrates, using the product's fantastic adhesion properties

Please note: Where a 'dead flat' finish is required, Polyvine recommend that surfaces are first treated with 2 coats of satin varnish and then finished with a thin coat of 'dead flat' varnish. The 'satin' varnish in this range is chemically more durable than the 'dead flat'. This provides a more durable finish than using 'dead flat' on its own for all coats.'

Ensure that surfaces to be varnished are clean, dry and free from dirt, dust, grease, wax, polish and any other surface contaminants.

Bare or New Wood

1. Fill any gaps or minor imperfections in the wood with a suitable wood filler
2. Lightly sand bare or new wood to provide a key
3. Take care to remove all traces of sanding dust prior to finishing
4. Degrease wooden surfaces with a lint-free cloth dampened with Methylated Spirit if required

Previously Painted Surfaces

1. Newly painted wood should first be sanded to provide a key
2. Take care to remove all traces of sanding dust prior to varnishing
3. Older painted wood, where the paint itself may fail, should be stripped using a hot air gun or a suitable paint stripper, then sanded and cleaned prior to finishing

Always do a test area before starting any project to assess product suitability and final finish. Follow the manufacturer's instructions on the container at all times.

Please note: Multi-Surface Lacquer should not be applied over uncured oil-based paint as this may cause discoloration. When applied over an emulsion / latex paint, it is possible that it could draw certain stains through the paint which were not otherwise visible. In this case a dedicated stain sealer should be used.

1. Ensure the product is well mixed. Do not shake
2. Thinly apply 2-3 coats of varnish using a synthetic bristle brush or spray applicator
3. On porous surfaces dilute the first coat with 10% water
4. Allow 1-2 hours between coats. Will be fully cured in 5 days

Cleaning Equipment

Application equipment can be cleaned using soap and water before the varnish dries. Wipe any excess off surfaces with a damp, lint-free cloth. Any dried deposits will need a paint stripper to remove them.

Regular Cleaning

Surfaces coated with Polyvine Multi-Surface Lacquer as a finishing coat, can be wiped clean with a dampened lint-free cloth. Never soak wooden surfaces with water or use household detergents or cleaners as these can damage the finish.

Is this suitable for flooring?

No, we do not recommend this on flooring, instead consider Polyvine Heavy Duty Floor Varnish.

Can this be used to seal plaster of Paris?

The Multi-Surface Lacquer is very versatile and can be used for a huge range of projects. It has not officially been tested on this substrate but a test area would be best to assess the suitability and performance of the product.

Can I use Multi-Surface Lacquer on painted kitchen worktops?

It will provide some durability, Polyvine Decorators Varnish is better suited over paint work. It will also depend on the quality of the paint. If the paint is not suitable for high wear areas the varnish may prematurely fail.

Can you use this on ceramic tiles in shower?

Polyvine Multi-Surface Lacquer is a clear, water-based acrylic varnish that can be used on a wide variety of surfaces, including ceramic.

Can I use Multi-Surface Varnish on a metal/ steel bird table?

Absolutely, the Multi-Surface Lacquer can be used to seal in and protect metal surfaces. As it offers UV protection, water resistance and is completely safe for animals and food once dry it is a top pick for this project.

What shelf life does Polyvine Lacquer have after being opened?

The shelf life would be approximately 12 months once opened,

Can Polyvine MS Lacquer be used to seal imitation gold leaf?

Absolutely, this will help to protect the Imitation Gold/ Silver.

Can I use this on copper heating pipes to keep them shiney & new looking?

Absolutely, Polyvine Multi-Surface Lacquer is a great choice for this project especially if you are after something super glossy. The gloss version of this product is approx. an 88% sheen which is incredibly high for a water-based lacquer.

Can this be used on metal or brass for jewellery making?

This product can be used on metal and brass and will give the substrate a film coating of protection to resist UV discolouration and rust.

Does the Polyvine Multi-Surface Lacquer come in colours?

You can colour Polyvine Multi-Surface Lacquer with up to 10% of Polyvine Acrylic Colourant. Every 50g pot of colorant would need mixing into 500ml of lacquer. This is available in 13 shades and can be intermixed to create your own bespoke colour.

Can we use Polyvine Multi-Surface Lacquer to seal decoupaged seashells? Would it turn yellow?

As a multi-surface lacquer, this is designed to perform well on a wide range of surfaces but it has not specifically been tested on seashells. We would advise a test area to assess final results. As a water-based varnish, this lacquer gives a crystal-clear finish which does not yellow.

Can Polyvine Multi-Surface Lacquer be used on paper to seal in pencil and pen? I am also looking for something i can use to fix my finished colouring page's too

A varnish or lacquer will absorb into the paper and may start to warp the pages depending on their thickness. It could also smudge or break down fine lines or piments. We recommend seeking advice from art shops who may have something more suitable.

Can Multi-Surface Lacquer be used to seal painted furniture?

Absolutely, just be sure to complete the preparation steps before use to provide adhesion.

Can I use Polyvine Multi-Surface Lacquer on laminate kitchen worktops?

Yes, this product has excellent resistance to heat, water and stains with great sanding properties, making it ideal for this type of project.

Is Polyvine Multi-Surface Lacquer suitable to use on polymer clay / fimo?

This has not been tried and teste don this type of surface. Once the substrate has fully hardened and cooled down, we would recommend a test area.

Can I apply Polyvine Multi-Surface Lacquer on terracotta pots outside?

This should be fine but try a test area first just to be sure.