Polycell Flexible Gap Polyfilla

Polycell Flexible Gap Polyfilla achieves a white flexible crack-free fill between two surfaces where movement can occur. Allows controlled application direct from a skeleton gun making it perfect for long linear gaps.

Suitable for gaps around doors, window frames and skirting boards.

To achieve optimum results, the surfaces needs to be clean, dry and free from dirt, dust or any other surface contaminants.

• Ensure the surface and gaps are dry and free from loose material
• Remove the tip of the cartridge carefully with a sharp knife and screw nozzle on
• Remove the cap and carefully cut top from nozzle with a sharp knife to the bead size required

1. Place the cartridge into the skeleton gun and seat the plunger by pressing the trigger
2. Squeeze the trigger to force out the filler and move the gun along the repair
3. The filler may be smoothed with a wet rounded spatula or dowel
4. Wipe off any excess filler before it dries
5. Can be over painted when fully dry (at least 24 hours)

Please Note: Painting over with low grade emulsion paints can cause cracks in the film