Osmo Stone and Terracotta Oil

Osmo Stone and Terracotta Oil is an oil based protector made from a unique blend of oils, creating a water and dirt repellent barrier. It is ideally suited to window sills and paving made of granite, limestone and slate. It is stain resistant and greatly reduces dust from concrete and screed surfaces.

Looking for a natural oil that protects internal concrete and tiles, try Osmo Concrete Oil.

Please note: Applying this product to porous, underfoot surfaces such as paving may alter the surface characteristics and slip resistance. Due to the nature of this product, water is more likely to bead on path and patio surfaces. May cause yellowing to white and other light coloured surfaces.

Ensure that surfaces to be coated are clean, dry and free from dirt, dust, grease, wax, polish and any other surface contaminants. To ensure successful treatment, Osmo Stone and Terracotta Oil should be applied to porous substrates only.

Always do a test area before starting any project to assess product suitability and final finish, as yellowing may occur on white and light coloured surfaces. Follow the manufacturer's instructions on the container at all times.

Osmo Stone and Terracotta Oil is ready for use from the container and should not be diluted. Stir well, do not shake.

1. Apply first coat thinly and evenly using an Osmo Microfiber Floor Roller in Freshbox or Osmo Floor Brush and for small areas an Osmo Soft Tip Brush or Osmo Oil Finish Application Fleece
2. Remove any surplus oil using a pad or lint free cloth
3. For larger areas, remove any excess oil using a rubber scraper and polish with a buffing machine
4. Once all oil has been absorbed, allow to dry for 8-10 hours
5. Apply a second thin coat and allow to fully dry
6. If renovating a previously oiled finish, then one coat on a prepared surface should be sufficient

Cleaning Equipment

Application equipment can be cleaned using Osmo Brush Cleaner and Thinner (8000)