Osmo Polymer Composite Maintenance Oil

Name: Osmo Polymer Composite Maintenance Oil
Rating: 4.88 (8 reviews)

4.9/5 (8 reviews)

£26.25

Quantity

2 in stock.

Ideal protection against dirt and stains

Features

Suitable for maintaining and restoring weathered wood polymer composites
Makes the surface water repellent
Protects against dirt and stains to the surface
10 hour drying time

Brand

Osmo

Drying time

10 hrs

No. of coats

2 coats

Size

MPN

Please make a selection

GTIN

Please make a selection

Overview

Osmo Polymer Composite Maintenance Oil 030 is a clear satin oil that penetrates the substrate and forms a protective barrier. Through impregnation the surface area is protected from dirt, oil and grease whilst also becoming water repellent.

Please note:

Oils enhance the natural colour of a substrate and produce a permanent wet effect appearance
Trial application is recommended
White or very light coloured surfaces can appear to be slightly yellowed by the oil
Non-absorbent surfaces, such as glass, glazed tiles or plastics cannot be treated
The impregnation of the oil could influence the slip resistance of the original surface

Preparation

Ensure the project area is sound, clean, dry and free from dust, frost and debris.

Remove any loose debris from the project area with a suitable cleaning instrument, such as a stiff bristled brush
Ensure the project area is weathered by abrading the surface to aid with absorption
It is recommended to clean the project area with Osmo Polymer Composite Cleaner (8021)
Osmo Polymer Composite Maintenance Oil is ready to use with no need for dilution
Rinse the project area thoroughly with clean water and allow to dry

Application

Always perform a test area to judge suitability and the final finish. Also, for the best results, please follow the manufacture's instructions

Apply with the use of a Osmo Floor Brush or Osmo Soft Tip Brush
Osmo Polymer Composite Maintenance Oil needs to be applied very thinly to aid absorption and needs to absorbed into the surface
Ensure there is no residue left on the surface or within the grooves
If there is any pooling of residue then use a dry brush to remove any excess oil
Ensure good ventilation to the project area to aid with drying

Excess oil can be very slow drying and will produce a glossy layer with poor adhesion to the substrate

FAQ

How should Osmo Polymer Composite Maintenance Oil be applied?

This is best applied thinly using a Osmo Floor Brush or Osmo Soft Tip Brush, removing any excess from the surface using a clean Woodleys Microfiber Cloth.

Datasheets

Product Information Safety Information

5 stars: 7 (88%)
4 stars: 1 (13%)
3 stars: 0 (0%)
2 stars: 0 (0%)
1 star: 0 (0%)

Worth every penny.

Using this oil for solid raw white oak staircase. Ive sanded then applied first coat of cosmo oil thinly with a cut off piece of cotton tea towel, Then buffed gently after 10 minutes. Already looks brilliant. A final light sand tomorrow then oil again. Im over the moon with this product. I also used cosmo decking oil for my outdoor decking and it's come up like new. Don't hesitate to buy this it's the best I've ever used, and I have tried several in the past.

Really is a good product.

It brought my composite deck and the composite boards on my garden room back to life it needed two coats .

Impeccable service and great product

I had damaged the surface of my composite decking with a power wash .. so please beware ! I spoke to a sales person who recommended this polymer oil along with a Prosecco brush. He was right as the finish is superb and probably looks better than when new. The 1 litre tin just covered our 30 sq metres. Really pleased and would highly recommended

First class product

Absolutely delighted with this product-definitely needed 2 coats but what a product, it has brought my decking back to life - excellent product.

Overall good.

Put 2 coats on faded light grey composite decking, not easy to apply thinly and evenly and to stop pooling in grooves. Colour now dark grey and looks pretty good. Time will tell only applied recently.

Great quality Oil

I used this oil on brand new composite boards which were £30 per 4m length. The boards were not bad quality, solid core, but I could see that from the day of installation they were getting very dirty and looking 'not as good as what I expected', even after a good clean.. This oil has brought them right up, they look better than when I installed them. The deck now looks amazing and has higher stain resistance... Not fading after 2 months of application.. Will use again if needed in the future ...