Manns Extra Tough Door Varnish

Manns Extra Tough Door Varnish is a clear, acrylic, high-build wood lacquer, ideal for wooden doors, door frames, and architrave.

Please note: Always check the manufacturers label on the door or with the door manufacturer before applying a door finish to confirm suitability.

Ensure that doors to be varnished are clean, dry and free from dust, dirt and any other surface contaminants.

1. All previous finishes must be completely removed back to bare wood by stripping or sanding the wood
2. Fill any gaps or splits in the wood using a suitable interior wood filler
3. New wood can be cleaned and degreased with methylated spirit if required
4. Freshly sanded wood should be wiped down with methylated spirit to remove all traces of sanding dust, dirt and debris
5. Prior to varnishing, softwood surfaces can be stained with Manns Classic Pine Stain whilst hardwood surfaces can be stained with Manns Classic Oak Stain or any other suitable wood stain

Always do a test area before starting any project to assess product suitability and final finish. Follow the manufacturer's instructions on the container at all times. Stir well before use.

1. Apply a generous coat of varnish in the direction of the wood grain, using a microfibre roller or synthetic bristle brush
2. Allow 1 hour 30 minutes to dry
3. De-nib (lightly sand) the surface between coats
4. Apply second coat in the same manner as the first and allow to dry

Please Note: If applying over of a water-based stain or dye, ensure only a minimum of light brush strokes are used to avoid dislodging the colour. This only needs to be done for the first coat of varnish.

Regular Cleaning

Wooden surfaces coated with Manns Extra Tough Door Varnish can be cleaned on a day to day basis with a damp, lint-free cloth.

Deep Cleaning

For marks and scuffs, and for periodic cleaning, use a dedicated, pH balanced wood cleaner.

Please Note: Varnished surfaces should never be saturated with large amounts of water or cleaned with household detergents or cleaners as these can be damaging to the finish.