Little Greene Intelligent All Surface Primer

Little Greene Intelligent All Surface Primer provides a reliable foundation for a flawless finish across a wide range of substrates. Designed to perform both interior and exterior, it helps ensure long-lasting results and a professional standard of application. By creating a consistent, stable base, it prepares surfaces to receive Little Greene topcoats with maximum performance and durability.

For best results, ensure all surfaces are sound, clean, dry and free from dirt, dust, grease or any other surface contaminants.

1. Remove all loose, flaking or defective paint with a paint scraper, by sanding, or with a paint stripper
2. Special precautions should be taken when preparing pre-1960s paint surfaces as they may contain harmful lead
3. Fill any surface defects with a suitable filler, such as Prestonett Multi Purpose Interior Filler and sand smooth when dry
4. Rub down existing paintwork to provide a key and "feather in" areas where paint has been removed
5. On new or bare wood, seal knots with knotting compound before priming
6. For metal surfaces, thoroughly clean to remove all traces of rust, scale and corrosion using a wire brush, abrasive paper, or mechanical tools, ensuring a smooth, sound surface before priming
7. For new plaster, ensure surfaces are fully dry before application and thin the primer with clean water if required
8. Wash surfaces where necessary with Barrettine Sugar Soap Concentrate to remove grease, dust or powdery residues, then rinse thoroughly with clean water and allow to dry
9. Wipe down prepared areas with a damp, lint-free cloth to remove sanding dust

Always test a small area before starting any project to check product suitability and the final finish. Follow the manufacturer's instructions on the tin at all times.

Use only in well-ventilated areas and avoid painting in temperatures below 8°C or where there is a risk of rain during drying.

For best results and colour consistency, purchase enough paint for the entire project including future touch-ups.

1. Stir thoroughly before and during use
2. Apply 1-2 coats of Little Greene Intelligent All Surface Primer using a high-quality synthetic brush, roller, or spray, such as Osmo Premium Roller, Brush and Tray Set
3. Maintain a wet edge, avoiding over-brushing once the paint begins to dry
4. Allow 1-4 hours between coats, depending on conditions
5. Lightly sand between coats if required to achieve a smooth finish
6. Clean tools and equipment immediately after use with clean water

To maintain the best finish and long-term performance, follow these simple aftercare steps:

1. Allow painted surfaces to fully cure before subjecting them to heavy use or cleaning
2. For light cleaning, use a dilute solution of lukewarm water and mild detergent with a soft sponge or cloth
3. Avoid harsh scrubbing pads or abrasive cleaners that could damage the surface
4. Ensure radiators and other heated surfaces are at room temperature before cleaning
5. Maintain good ventilation in the home to help prevent dust and grease build-up
6. Use a vacuum with a soft brush attachment to gently clean adjacent areas and prevent marking
7. For minor repairs, lightly sand the affected area, spot prime any bare substrate, and reapply as required
8. Avoid placing heavy objects on freshly painted surfaces for at least a week after application
9. Dispose of leftover paint responsibly and recycle empty tins where facilities exist

Can Little Greene Intelligent All Surface Primer be used on both interior and exterior surfaces?

Yes, it is suitable for most interior and exterior substrates, making it a versatile choice for a wide range of projects.

Do I need to use a separate primer with Little Greene topcoats?

No, this product is designed to work as a universal primer and undercoat for both water-based and oil-based Little Greene finishes.

How many coats of Intelligent All Surface Primer should I apply?

Usually one coat is sufficient, but two coats may be required on porous, uneven or heavily stained surfaces.

What is the drying time?

The primer is surface dry in around 30 minutes and can normally be recoated after 1-4 hours, depending on conditions.

Can I use this primer on metal?

Yes, but all rust, scale and corrosion must be thoroughly removed before application to ensure proper adhesion and long-lasting results.

Is Intelligent All Surface Primer safe to use in the home?

Yes, it has very low VOC content, is A+ rated for indoor air quality, and meets child safety standards (BS EN71-3:2019).

What is the coverage per litre?

On average, coverage is up to 13m² per litre, depending on surface porosity and texture.

Can I clean surfaces painted with Intelligent All Surface Primer?

Once fully cured, surfaces can be lightly cleaned with a mild detergent solution and a soft sponge or cloth. Avoid abrasive cleaners.

How should I store leftover primer?

Store unopened tins in a cool, dry, frost-free place, away from direct sunlight. When stored correctly, the primer remains stable for up to two years.