Liberon Wood Filler

Liberon Wood Filler is a highly versatile wood filler that can be used to repair a wide range of wooden surfaces, including those that need to be nailed or screwed. This strong yet flexible filler can be easily sanded to achieve a smooth, even surface then finished with a variety of wood finishing products.

• Need something for scratches, dents and dinks on finished furniture? See our range of Liberon touch-up pens and wax filler sticks.

Ensure the area to be repaired is clean, dry and free from dust, dirt and any other surface contaminants. Select the colour which is closest to the colour of the wood, adapting your choice if dying the wood.

Always do a test area before starting any project to assess product suitability and final finish. Follow the manufacturer's instructions on the tin at all times.

1. Apply the filler using a plastic scraper or suitable filling knife
2. Small holes may be filled in one operation; deeper holes should be built up in layers
3. For best results, avoid over-spreading the repair area, but leave sufficient over-fill to enable thorough sanding
4. Allow to dry thoroughly for 2 hours or more depending on the depth of the repair
5. Then sand, colour and finish as required

Please Note: Liberon Wood Filler may accept dyes/stains differently to the surrounding wood. When using outdoors, protect with a suitable exterior grade finish.

I want a filler that I can use to fill a gap between two pieces of plywood and then be able stain the wood and filler without seeing the joint afterwards. Will this work?

Yes, be sure to sand the surface after the filler has dried to achieve a smooth surface. The Liberon wood filler may accept stains differently to the surrounding wood. Always select the colour based on the colour of the wood but adapt your choice if you are dying the wood. You can also mix the shades together to create your own unique blend of colour.