Liberon Ring Remover

Liberon Ring Remover will remove most white water marks and heat marks from most highly polished surfaces, including French polishes, lacquers, varnishes and modern hard finishes.

Please Note: White marks made by water or heat on waxed surfaces may be removed using Liberon Wax and Polish Remover. Dark marks made by water or heat indicate damage to the wood. In this case, the finish may need to be completely removed with a suitable paint stripper or varnish remover.

Ensure that wood to be treated is clean, dry and free from dust, dirt and any other surface contaminants.

Always do a test area before starting any project to assess product suitability and final finish. Follow the manufacturer's instructions on the tin at all times.

1. Shake well before use.
2. Apply Liberon Ring Remover with a clean, lint-free cotton cloth and rub vigorously in a circular motion over the mark, going with the grain, until the mark is removed
3. Buff with a clean, dry cotton cloth, then wax or polish as normal
4. For badly marked surfaces, Ring Remover may be applied using Liberon Ultra Fine (0000) Steel Wool and then buffed with a cotton cloth

Please Note: This product may produce a shiny surface when used on matt or satin finishes. If this occurs, gently matt back the surface with Ultra Fine (0000) Steel Wool and re-wax with a suitable wood wax .