Liberon Pure Tung Oil

A lovely product, follow the instructions, and take the time and care that it says, the end result is great.

Only after some 3 years I can say something how it behaves in sun, water and snow. no comments at the moment

This oil does what it says on the tin. I don't always sand my kitchen unit down first, only if it has obvious marks or stains on it. I make sure its clean of any food residue then wipe on the oil with a lint free muslin cloth. It has to be left for 24 hours untouched so I do this before I go away for a day or so. This oil certainly coats the wood making it stain and waterproof.

Refurbishing an old oak book case. Sanded off all the old varnish. Applied four coats as directed, one every 24 hours. Left for a week withe the occasional wipe down to remove excess. Very pleased with the finish. Nice colour.

This is pure tung oil as opposed to the products found in DIY stores that are described as tung oil but are actually blended oils. The Liberon product is an excellent and consistent quality.

Very easy to use and a friendly material to work with, non-toxic, sustainable etc

Required this product for renovation of an oak garden seat. Easy to apply, followed instructions on tin and achieved a pleasing result.

Does what it says on the tin!

Very happy with finished result good instructions and easy to use.

Used on a kitchen top because of its natural properties. It’s hard wearing, non toxic and dries to a soft sheen. I used three coats leaving 24 hrs in between. On the first coat I mixed 50/50 white spirit to help absorption. Use a lint free cloth to remove the excess immediately. On the second coat I didn’t do this straight away and it dried quiet sticky. I resolved this by using the white spirit to rub off this layer. The final coat should be neat. The result is beautiful and odor free.

Arrived quickly and work well to protect my woodcarving

So far the protection still looks good but time will tell. Previous oils that I have used have not prevented the sculptures going black. I hope this will not happen with this new oil that you recommended to me.

Hand a lovely finish ,easy to work with

Is what it is and does what it should

Used this to do our village benches, some not having been done for years. Has brought them up like new.

Easy to apply, leaves attractive sheen on well prepared hardwood after 3 coats. Had no need to dilute first coat. Good price!

Would recommend this product for natural wood.

I have a walnut window sill, basically a board of American walnut I bought. Having researched using Google, it appears best product to use is tung oil. I sanded my board using finer and finer grain sanding paper. I then used this tung oil. I put a new coat on every week. 4 coats in all. That is what was advised, but I can do more later. It takes ages to dry, but once done result looks very good. I advise doing this in Summer, when it is warm so it dries quicker.

Goes on well, doesn’t dry as quickly as you might hope, but that’s in a cool workshop, guessing it will be quicker in the summer, nice finish. Will have to wait to see how it lasts outside.

Lovely finish and still some left in the smallish tin after lots of coats!

Excellent product did not need as much as I thought plenty left for next year

Used with a thinning of white spirit as a base to really soak into the wood followed by three applications neat did a good job.

Easy to apply and gives a excellent finish. Smells wonderful when working with

Used for making my chopping boards have a deep ingressed food safe finish, easy to apply.