Liberon Natural Finish Stone Floor Sealer

Name: Liberon Natural Finish Stone Floor Sealer
Rating: 4.83 (6 reviews)

4.8/5 (6 reviews)

size

1L 5L

From £19.39

Quantity

Feeds and seals natural and man-made stone slab and tile floors. Waterproofs and protects floors from staining.

Features

A water-based floor sealer for stone, slate, terracotta and other hard floor surfaces
Ideal for hard surface kitchen and bathroom floors
Effective after just one coat on most surfaces
Ideal for use on new or old stone flooring
Suitable for interior and exterior floors
Maintains the natural look of the stone
Waterproofs and protects from staining
Resists food oils and grease marks
Low V.O.C

Brand

Liberon

Drying time

24 hrs

No. of coats

1 coat

Size

1L, 5L

MPN

Please make a selection

GTIN

Please make a selection

Overview

Liberon Natural Finish Stone Floor Sealer is a highly effective sealer for protecting interior and exterior terracotta, slate, York stone, ceramic (including porous / non-glazed ceramic tiles), marble and other porous stone flooring.

Endorsed by the Guild of Master Craftsmen, Liberon Natural Finish Stone Floor Sealer feeds and seals natural and man-made stone slab and tile floors. When applied, the sealer enhances the natural colour of the stone whilst also reducing crumbling and dusting of the substrait.

Please Note: This product is not suitable for use on previously oiled surfaces.

For other bare interior wood such as furniture and MDF, consider a suitable wood primer or sealer

Preparation

Ensure the surface is clean, dry and free from dust, dirt and any other surface contaminants prior to applying Natural Finish Stone Floor Sealer.

Application

Always do a test area before starting any project to assess product suitability and final finish. Follow the manufacturer's instructions on the container at all times.

Apply Stone Floor Sealer generously with a synthetic paint brush or lint-free cloth and allow to dry for one hour
Check if the surface is properly sealed by dropping a small amount of water onto the floor
Leave for 10-15 minutes and if the water remains on the surface then enough sealer has been applied; if not then further coats of sealer are required
Repeat application and testing until the surface is properly sealed
The number of coats required will depend upon the porosity of the stone
Allow the final coat of sealer to dry for 24 hours before floors receive foot traffic

Aftercare

Maintenance

Inspect annually and test water repellency by placing a drop of water on the surface. If the water sits on top of the surface and doesn't get absorbed, the product is still working adequately. If the water gets absorbed into the surface, simply re-coat with one fresh coat of Liberon Natural Finish Stone Floor Sealer.

Datasheets

Product Information Safety Information

5 stars: 5 (83%)
4 stars: 1 (17%)
3 stars: 0 (0%)
2 stars: 0 (0%)
1 star: 0 (0%)

Great floor sealer; completely water white.

Used Liberon natural finish sealer before so I know it works. Application was on tumbled marble floor tiles. It takes a while to dry as it’s water based but fortunately there was underfloor heating. The downside is that if was cold it would take an age to dry. The massive plus is that it doesn’t affect the surface colour at all as its water white and dead matt.

Liberon is the best brand you can buy

The 1L goes a long way. I did 2 coats over 14sqm and have a fair bit left. Low odour and dries quick

Brilliant

Delivered promptly and well packed. Will use again

Got what I wanted for a competitive price. Delivered on time as promised.

Bought it to seal magnesite floor built in the 1950s. Magnesite is very porous and we think this product could work to make the floor dust-free, water repellent and easier to clean. Easy to apply but cannot say if it works yet for what we expect it to do. We shall see as the floor wears.