Liberon Beeswax Paste with Pure Turpentine

Liberon Beeswax Paste with Pure Turpentine is a traditional wax paste, ideal for nourishing absorbent woods such as unsealed Pine and Oak. It is especially well suited to smaller surfaces and interior wooden furniture.

Please Note: This product is not suitable for high water areas, such as kitchens and bathrooms.

• Also available in a liquid wax formulation: Liberon Liquid Beeswax with Pure Turpentine
• Looking for purified beeswax? See Liberon Purified Beeswax
• Need an alternative type of wood wax? See our range of Liberon wood waxes

Ensure that surfaces to be waxed are clean, dry and free from dust, dirt and any other surface contaminants.

• Remove old waxes and dirt with a wax and polish remover if required

Always do a test area before starting any project to assess product suitability and final finish. Follow the manufacturer's instructions on the container at all times.

1. Apply a coat of Liberon Beeswax Paste sparingly with a soft, lint-free cotton cloth or Ultra Fine (0000) Steel Wool
2. Allow to dry for a minimum of 1 hour, then buff with a clean cloth
3. Repeat the operation on new or very dry wood, as it may require two or more coats
4. For a higher sheen, build-up with thin coats of Beeswax, buffing between coats
5. Buff with the finish with a suitable soft buffing brush once the last coat has completely dried

Maintenance

Wipe over with a cloth or duster and re-apply Liberon Beeswax Paste when the surface looks dull and tired.

Please Note: Do not wash the finished surface with water, as this can be damaging to the finish.