Product Image

Hammerite Ultima Matt

£25.32
Skip to product information

Hammerite Ultima Matt

Product Image
Hammerite Ultima Matt
Option
size:
750ml
£25.32

Quantity

A long lasting, durable metal paint offering ease of use combined with maintaining a long lasting colour finish

Features

  • Durable and tough with up to 12 years protection
  • Colour lock technology giving long lasting colour
  • Undercoat or priming is not required
  • Can be applied directly to rust affected metal
  • Recoatable in 4 hours after application
Brand
Hammerite
Drying time
4 hrs
No. of coats
2 coats
Size
750ml
MPN
Please make a selection
GTIN
Please make a selection

Overview

Hammerite Ultima Matt is suitable for either non-ferrous or ferrous metals and is ideal for use on metal doors, gates, railings, garden furniture and more without the need to undercoat or prime the surface. With being a water based formulation that can be applied directly to metal and provides a tough, durable and decorative coating for exterior and interior projects. It can also offer a protective coating that will last for up to 12 years that will guard against harsh and inclement conditions .

If you would prefer a smooth finish then please try Hammerite Ultima Smooth

Preparation

To the best results, ensure surfaces to be coated are free from all poorly adhering or defective material, are structurally sound and clean from dirt, grease, rust or paint.

  • Apply dust sheets to protect any surfaces that are to remain unpainted
  • Flaking or loose rust, paint or debris will need to be removed prior to coating, either by sanding, or with using a wire brush or light blast cleaning
  • On a previously painted surface, lightly abrade and then clean with a suitable detergent, thoroughly rinse and allow to dry
  • Repair any imperfections in the surface, such as holes and cracks, with a suitable metal filler and allow to harden
  • Lightly abrade smooth metal surfaces to form a sound key. Rinse thoroughly and allow to dry

Please Note:

  • In the case of new galvanised steel, let the surface weather until dull and then prepare the substrate with the instructions above

Application

Always create a small test area to assess colour and compatibility of the finish.

Follow the manufacturer's instructions on the tin at all times.

  • Ideally, apply between 10-30°c, avoiding extremes of temperature
  • Mix and stir the paint before applying, ensuring to work the base and sides of the tin to help a consistent mix
  • Apply using a good quality microfibre roller or synthetic brush
  • For best results, 2 thin coats are recommended
  • Dilution is not required as the paint is supplied at the correct consistency
  • Leave 4 hours drying time between coats

Datasheets

Safety Information

You may also like