Dulux Trade Sterishield Diamond Eggshell

Dulux Trade Sterishield Diamond Eggshell is a tough and durable, anti-bacterial eggshell paint which inhibits bacteria and helps protect against MRSA and E. coli. Its water-based, quick drying formula is suitable for all interior walls, drywall and ceilings, offering a high resistance to scratches, scuffs and stains.

• Need an anti-bacterial matt emulsion? Use Dulux Trade Sterishield Diamond Matt
• Looking for an alternative paint finish? Take a look at our range of Dulux Trade Finishes for Walls and ceilings

Please Note: This product is not suitable for immersed surfaces or where there is very heavy and prolonged condensation.

For best results, ensure surfaces to be painted are sound, clean, dry and free from dirt, dust or any other surface contaminants.

1. Remove all loose and defective paint with a paint scraper by sanding or with a paint stripper
2. Special precautions should be taken during surface preparation of pre-1960s paint surfaces as they may contain harmful lead
3. Where necessary, wash the surface to remove dirt, grease and powdery or dusty residues
4. Rinse with clean water and allow to dry
5. Any surface defects should be filled with an appropriate filler
6. If required, rub down surfaces and then wipe off with a damp, lint-free cloth to remove dust
7. Seal all surfaces that remain powdery after thorough preparation with an appropriate plaster sealer, or use Dulux Trade Stain Block Primer, which will also seal in any stains

Always do a test area before starting any project to assess product suitability and final finish. Follow the manufacturer's instructions on the tin at all times.

For best colour consistency, purchase sufficient paint for each project including enough for touch-in at a later time.

Do not use below 8°C or in areas of high humidity or condensation.

1. Stir the paint thoroughly before and periodically during use
2. Apply with a good quality synthetic brush, microfibre roller, conventional spray or airless spray system
3. Seal new or bare surfaces with a thinned first coat of Dulux Trade Sterishield Diamond Eggshell, up to 1 part clean water to 10 parts paint
4. The normal finishing process is 2 full coats of Sterishield Diamond Eggshell
5. For significant colour change, further coats may be required
6. Allow 2 to 4 hours between coats and 6 hours to fully dry

Thinning Guidelines

• Sealing new or bare surfaces: Add up to 1 part clean water to 10 parts paint
• Normal use: Add up to 1 part clean water to 10 parts paint
• Conventional spray application: Add up to 1 part clean water to 2.5 parts paint
• Airless spray application: Add up to 1 part clean water to 5 parts paint

To maintain the finish, simply apply a fresh coat of Dulux Trade Sterishield Diamond Eggshell as required, following the Preparation and Application instructions above.