Dulux Trade Scuffshield Matt

Dulux Trade Scuffshield Matt is a tough matt emulsion which uses scuff resistant technology that protects against scratches and scuffs on interior walls and ceilings, making it ideal for high traffic, busy areas around the home and in commercial environments.

• Looking for an alternative paint finish? Take a look at our range of Dulux Trade Finishes for Walls and ceilings

Please Note: This product is not suitable for immersed surfaces or where there is very heavy and prolonged condensation.

For best results, ensure surfaces to be painted are sound, clean, dry and free from dirt, dust or any other surface contaminants.

1. Remove all loose and defective paint with a paint scraper by sanding or with a paint stripper
2. Special precautions should be taken during surface preparation of pre-1960s paint surfaces as they may contain harmful lead
3. Where necessary, wash the surface to remove dirt, grease and powdery or dusty residues
4. Rinse with clean water and allow to dry
5. Any surface defects should be filled with an appropriate filler
6. If required, rub down surfaces and then wipe off with a damp, lint-free cloth to remove dust
7. Seal all surfaces that remain powdery after thorough preparation with an appropriate plaster sealer, or use Dulux Trade Stain Block Primer, which will also seal in any stains

Always do a test area before starting any project to assess product suitability and final finish. Follow the manufacturer's instructions on the tin at all times.

For best colour consistency, purchase sufficient paint for each project including enough for touch-in at a later time.

Do not use below 8°C or in areas of high humidity or condensation.

1. Apply with a good quality synthetic paint brush, microfibre roller or spray applicator
2. Seal new or bare surfaces with a first coat of thinned Scuffshield, adding up to 1 part
   clean water to 5 parts paint
3. Apply 2 full coats on previously coated or suitably primed surfaces
4. Allow 4 - 6 hours drying time between coats
5. For significant colour change, further coats may be required

Thinning Guidelines

• Sealing new or bare surfaces: Add up to 1 part clean water to 5 parts paint
• Normal use: Add up to 1 part clean water to 10 parts paint
• Airless spray application: Add up to 1 part clean water to 10 parts paint

Regular Cleaning

Surfaces should be wipeable after about 7 days. Simply wipe any stains or spillage with soapy water and a slightly dampened, lint-free cloth.

Vigorous scrubbing or the use of abrasive cleaners will affect the Matt finish

Maintenance

If the finish begins to look worn over time, simply apply a fresh coat of Dulux Trade Scuffshield Matt, following the Preparation and Application instructions above.

To maintain the finish, simply apply a fresh coat of Dulux Trade Scuffshield Matt as required, following the Preparation and Application instructions above.