Dulux Trade Quick Dry Satinwood Paint

Dulux Trade Quick Dry Satinwood is an advanced water-based, satinwood finish that provides a smooth, durable top coat on both interior wood and metal.

Please Note: This product is not suitable for immersed surfaces or where there is very heavy and prolonged condensation.

Alternative Dulux Trade Paints Product Use Dulux Trade Satinwood A solvent-based satin paint for primed or painted wood or metal surfaces. Dries to a satin finish Dulux Trade Quick Dry Gloss A quick drying, waterborne coating for interior use. Offers a high gloss finish Dulux Trade High Gloss A solvent-based paint for interior wood and metal surfaces. Provides a washable, high gloss finish Dulux Trade Eggshell A solvent-based eggshell paint for interior use. Offers a durable, mid-sheen finish

To get the best results, ensure surfaces to be painted are sound, clean, dry and free from dust, dirt and any other surface contaminants.

• On bare wood, where a strong colour change is required, or when over-coating a factory primed substrate, we recommend priming with Dulux Trade Quick Dry Undercoat
• Thoroughly rub down previously painted surfaces, using 'wet flatting' methods where possible, then wipe off with a damp, lint-free cloth to remove all traces of sanding dust
• Special precautions should be taken during surface preparation of pre-1960s paint surfaces over wood and metal as they may contain harmful lead
• Treat any knots with an appropriate knotting solution
• Any surface defects should be filled with an appropriate wood filler
• When applying water-based paints to surfaces previously decorated with a conventional solvent-based paint, very thorough surface preparation will be necessary

Always do a test area before starting any project to assess product suitability and final finish. Follow the manufacturer's instructions on the tin at all times.

Do not apply at temperatures below 8°C. Do not use or store in extremes of temperature and protect from frost. Thinning is not usually necessary, but if required add up to 1 part clean water to 20 parts paint.

1. Stir thoroughly before and periodically during use
2. Apply with a good quality synthetic paint brush, microfibre roller or spray applicator
3. For best results if using a brush, lightly dampen both the brush and the surface prior to application to increase flow
4. Apply 2 full coats on previously coated or suitably primed surfaces
5. Allow 5 hours drying time between coats

Spray Recommendations

• Conventional Spray: Satisfactory through most types of conventional spray equipment
• Airless Spray: A typical recommendation for airless spray application is a minimum working pressure on paint of 133 bars (2000 lb/sq in) with a spray tip size of 0.38mm (15 thou) and a spray tip angle of 65°

To maintain the finish, simply apply a fresh coat of Dulux Trade Quick Dry Satinwood as required, following the Preparation and Application instructions above.

Can this be shipped to Northern Ireland?

The answer to this changes as regulations change from time to time. Please contact us on 01303 213838 to discuss whether we can ship to your area. Please have to hand information as to which item(s) you wish to purchase and the quantity you require, so we can check with our dedicated couriers.