Product Image

Dulux Trade Yacht Varnish

From £31.75
Skip to product information

Dulux Trade Yacht Varnish

5.0/5 (13 reviews)
Product Image
Dulux Trade Yacht Varnish
size
From £31.75

Quantity

A high-build clear gloss varnish with UV filters and fungicide for the protection of exterior wood.

Features

  • A high-build, solvent-based, clear gloss yacht varnish for exterior wood
  • Perfect for exterior doors, windows, joinery and more
  • Provides a highly durable and flexible finish to protect exterior wood
  • Contains UV filters to protect wood against the damaging effects of sunlight
  • Offers 3 year Weathershield Protection
  • High V.O.C
Brand
Dulux Trade
Drying time
24 hrs
No. of coats
3 coats
Size
1L, 2.5L
MPN
Please make a selection
GTIN
Please make a selection

Overview

Dulux Trade Exterior Yacht Varnish is a clear gloss coating for the decoration and protection of all exterior softwood and hardwood surfaces. Its high build, full gloss finish will last for up to 3 years if used in accordance with the manufacturer's instructions.

Preparation

For the best results, ensure that surfaces to be varnished are sound, clean, dry and free from all surface contaminates such as wax and oil.

Previously Treated Wood

  1. Remove all loose and defective coatings including previous coats of paint and varnish by sanding or by using a paint stripper
  2. Special precautions should be taken during surface preparation of pre-1970s paint surfaces they may contain harmful lead
  3. Thoroughly rub down all wooden surfaces in the direction of the grain to remove any grey, weathered wood and surface sheen from previous coatings
  4. Take care to remove all traces of sanding dust prior to varnishing
  5. Wood that has turned grey / silver as a result of sun damage can be treated with a suitable wood reviver or restorer

New or Bare Wood

  1. Fill any surface defects, open joints etc with a suitable exterior wood filler
  2. Seal all bare wood with 2 coats of a suitable wood preservative, including any new or bare replacement beading, then wipe off any excess basecoat from surrounding paintwork
  3. Replace any missing glazing material - do not use linseed oil putty for glazing

Application

Always do a test area before starting any project to test product suitability and final finish. Follow the manufacturer's instructions on the tin at all times.

For Health & Safety reasons relating to all solvent-based products, spray application is not recommended. This product should not be applied if air or surface temperature is below 5°C.

Stir thoroughly before and during application to ensure a consistent finish.

  1. Apply 2-3 coats of Dulux Trade Clear Yacht Varnish with a synthetic brush only
  2. Lightly sand (denib) between coats
  3. Allow 24 hours to fully dry

Datasheets

Product Information Safety Information
  • 5 stars: 13 (100%)
  • 4 stars: 0 (0%)
  • 3 stars: 0 (0%)
  • 2 stars: 0 (0%)
  • 1 star: 0 (0%)
A
A_V
Excellent product

This is a really good product with a good price and I will buy it again on my next project.

C
Caralynne Ledingham
Excellent

We used the yacht varnish before and it was good then. Good price and quick delivery from Wood Finishes.

M
Mr Golding
Good product

Living in France we get a lot of sun,and this has been use to coat our oak t&g on the back of our new built house.

P
Peter Stacey
Top Quality Product

I have now ordered from WFD twice for decking stain & varnish. Cannot fault them in anyway. Good prices and quick and free delivery (must spend £30). Great choice of products.

M
Michael D Payne
Nice product

Leaves a great finish. Only problem I ran into was 'what is brush cleaner' had to google it to find out what it contained. Also temperature limitations for application would be good to see.

A
Andrew Hazlewood
A rather tired door restored!

After a lot of sanding, and a couple of coats of this yacht varnish, our back door looks great again!

C
Caralynne Ledingham
Very good

Easy to use and leaves a good finish. Good price too.

M
Mr. D. R. Moore
Excellent product.

I have used this product for years and have found it excellent, I have often difficult to obtain

M
Morgan Davitt
worked great, very satisfied

Nice finish and easy to work with

R
Ryan Davies
Went far

Brought up a great shine and finish to a dark wood stained fascia

R
Ryan Davies
Goes far

Went really far brought out a great shine over a dark stained fascia board and the end product looked fantastic

P
Philip Platt
nice finish

Leaves a really nice gloss finish, takes a while to dry though. Cant comment on durability.

W
William Stephenson
Easy To Apply

Excellent Coverage, Easy To Apply, Highly Quality Finish.

You may also like