Cuprinol 5 Star Complete Wood Treatment

Cuprinol 5 Star Complete Wood Treatment is a clear, water-based, all-in-one wood preservative treatment for interior timber. Perfect for all interior timbers, including roof and floor joists, roof timbers, floorboards and more. It combines a woodworm killer, wet rot treatment and insect / fungus repellent all in one product.

• Need a dedicated woodworm treatment to protects against insect attack and re-infestation? See Cuprinol Woodworm Killer

Ensure that surfaces to be treated are clean, dry and free from dirt, debris and other contaminates.

1. Any existing surface coatings such as paints, varnishes and stains must be fully removed by sanding or using a suitable wood stripper prior to treatment
2. Existing traces of mould, mildew, algae and fungi must be removed with a stiff brush, broom or scraper
3. Treat affected areas with a suitable mould and mildew remover
4. All rotten timber must be cut out and replaced with new, sound wood

Always do a small test area before beginning any project to assess the end results. Follow the manufacturer's instructions on the container at all times. This product may cause darkening of some timbers.

1. For best results, apply with a suitable brush, in the direction of the wood grain
2. Apply to any freshly cut end grain, cut after the initial treatment
3. To ensure thorough protection, treat all surfaces where possible
4. Allow 48 hours to dry

Some Points of Note

• After full drying most glues, knotting solutions and fillers, such as Cuprinol All Purpose Wood Filler or Cuprinol Ultra Tough Wood Filler, can be used as normal
• Ensure timber is fully dry (approximately 3 days) before plastic flooring or rubber backed carpets are laid or hanging vinyl wallpaper
• If a long drying period is not possible, a vapour barrier such as heavy duty polythene sheet may be used

Please Note: Beehives and bee-keeping equipment must not be treated with Cuprinol 5 Star Wood Treatment.