Craig & Rose Artisan Metallic Effect

Craig and Rose Artisan Metallic Effect is a water based paint that produces a metallic effect finish. Suited to creating an attention grabbing feature wall or enhancing the trim on wooden furniture and craft items, the metallic effect can add a touch of luxury and create a sumptuous environment.

To achieve the best results, the surfaces need to be structurally sound, clean, dry and free from dirt, grit and grime

• Remove any old, substandard or flaking paint either by sanding or through the use of a paint scraper
• Extra precautions will need to be taken when preparing surfaces that contain pre-1960s paint as they could contain harmful levels of paint
• Any organic growths such as mould, fungi or algal, will need to be cleaned away with a scouring pad and a bleach solution (1 part to 3 parts water)
• If necessary, wash the surface to remove any dust, dirt, oil or grease with a suitable detergent, rinse with clean water and allow to dry thoroughly
• Porous surfaces or new, dry plaster will need to be primed with Craig And Rose 1829 All Purpose Undercoat or a suitable alternative

Please Note: Craig And Rose Artisan Metallic Effect is not suitable for highly absorbent surfaces

Always create a test area before the full application to judge the suitability and final finish of the product. Follow the manufacturer's instructions at all times

To guarantee the consistency of the colour, if multiple tins have been purchased the mix together in a large container to ensure regularity of colour and tone

Avoid applying Craig and Rose Artisan Metallic Effect if the air temperature or surface temperatures are likely to be close to freezing as this will damage the structure of the paint.

• Stir and blend the paint and the medium thoroughly, guaranteeing to work the sides and base of the tin to ensure consistency throughout the paint
• Before the full application, practice the technique on a separate piece of board or cardboard with your preferred method of application
• The first application needs to be with a medium nap roller to provide an initial texture to the application
• Whilst the paint is till wet, drag the brush across the surface to create random brush marks
• Work in small areas and overlap each area
• If Craig And Rose Artisan Metallic Effect is being applied by spray, then dilute the paint by 10%
• It could be necessary to apply 3-4 coats to gradually build up the effect

Avoid touching up the project area after the application as this will not match the original finish