Bona Vertical

£13.01

Quantity

10+ in stock.

A soft elastic, silane-based adhesive for use on wooden stairs, skirting boards and door thresholds. Rapid bonding with good grab.

Features

A flexible and elastic silane based adhesive for wooden stairs, skirting and door thresholds
Good adhesion to almost all substrates and timber surfaces
Low emissions and odour free
No need for a primer
Contains no plasticisers

Brand

Bona

Drying time

8 hrs

No. of coats

1 coat

Size

310ml

MPN

Please make a selection

GTIN

Please make a selection

Overview

Bona Vertical is an elastic 1 component saline modified construction adhesive can be used to bond between wooden surfaces or other surfaces. It is ideal for fixing hollow spots, skirting boards, floor repairs and wooden stairs. Extremely quick setting with a very high initial tack.

Suitable substrates are:

Wood and wood materials
Mineral materials such as stone, ceramic, natural stone
Cement-based materials
Calcium sulphate (anhydrite, gypsum) based floors / walls
Cleaned metal surfaces
Many plastics (PVC, rubber, PU, PS) Must not be used for bonding on or off PE and PP

Looking for a stronger adhesive for installing wooden floors? Consider Bona R848 Floor Adhesive, Bona Quantum Floor Adhesive, Bona Quantum T Floor Adhesive or Bona Titan Adhesive

Preparation

Ensure the project area is clean from any dust or debris and can provide a solid surface for the adhesive to cling to.

Remove any loose debris and ensure the substrate can provide a solid surface
If any oil an grease are present then remove this with a suitable detergent and rinse away any residue
The area should be slightly abraded to provide a texture for Bona Vertical to adhere to
Fill any gaps or cracks in the substrate with Bona Gap Master Filler
A primer is not typically needed

Application

Always do a test area to ensure product performance and suitability. To achieve optimum results, follow the manufacturer's instructions.

The adhesive itself must, if necessary, be bought to the right temperature before use, with the minimum working temperature being 5Â° C

Apply Bona Vertical with a cartridge gun
After opening the cartridge, slowly squeeze the trigger on the cartridge gun to initiate the flow from the nozzle
Apply the adhesive directly to one of the substrates and then connect to the other part to bond both parts together and are pressed together for 10 minutes
Depending on initial load, it may be necessary to fix the parts in place until setting has occurred
After 8 - 12 hours it is possible to apply load or stress, depending on temperature and humidity conditions.
If on the sub floor the applied adhesive has a skin, remove adhesive and re-apply
If excess adhesive is exuded it should be carefully removed with a filler knife or other suitable tool

Datasheets

Technical Information Safety Information