Bedec MSP Multi Surface Paint

BEDEC MSP Multi Surface Paint is a high quality, water-based paint suitable for both interior and exterior surfaces such as: timber, MDF, plastic, UPVC, concrete, brickwork, radiators, tiles, fibreglass, galvanised steel and much more. It can be applied over previously painted or varnished surface, including those coated with weathered bitumen, tar or creosote.

Looking for a high protection, multi-surface exterior coating? Use Bedec Barn Paint

Please note: Substrates which have had water-repellent preservative treatments applied should be avoided because adhesion could be compromised.

To get the best results, ensure surfaces to be painted are sound, clean, dry and free from all defective or poorly adhering material, dirt, grease and chalky residue. Sand all edges of remaining coating until smooth.

• Special precautions should be taken during surface preparation of pre-1960s paint surfaces over wood and metal as they may contain harmful lead
• Lightly abrade all surfaces to remove any grey, weathered wood and surface sheen from remaining coatings, and to open up the grain on new wood
• Remove any biological growth such as mould and algae with a suitable mould and mildew cleaner
• If applying to bare timber stain blocking primer should be applied prior to application to prevent any possible resin bleed staining the coating
• Pressure treated wood should be weathered for at least 6 months prior to coating
• Newly coated creosote surfaces should be weathered for at least 3 months prior to coating
• Ensure bare steel is free from rust, dust and scale prior to paint application
• New galvanised steel should be weathered for at least 2 months and doesn't need to be etched or pre-primed

Always do a test area before starting any project to test product suitability and final finish. Follow the manufacturer's instructions on the container at all times.

Do not apply at temperatures below 8°C or when rain is likely. Do not use or store in extremes of temperature and protect from frost.

When applying to new wood, untreated weathered wood, brickwork, cement, render, plaster or any porous substrate, the first coat should be thinned using 30% clean water.

1. Stir thoroughly before and periodically during use
2. Apply evenly and consistently, using a good quality synthetic bristle brush, microfibre roller, conventional H.V.L.P or airless spray gun
3. It is recommended to apply 2 - 3 coats
4. Allow to fully dry for 4 hours between coats
5. Fully dry in 2 - 4 hours
6. Do not apply to wet, damp or frozen surfaces

Cleaning Equipment

Clean brushes, rollers and any spillages immediately after use, using warm soapy water.

Can this be used on decking or interior flooring?

Although this product is extremely durable it can not be used under foot on decking or flooring, instead consider a decking or floor paint.

What is the dry time of the Bedec MSP Paint?

Please allow to fully dry for 4 hours between coat and before use during average temperatures of 18°C and 65%
relative humidity. This is fully cured after one month.

Should I dilute the MSP down before use??

On untreated weathered wood, new wood, cement, render, plaster, brick work or any porous substrate the first coat should be thinned with 30% clean water.

Can I put the Bedec MSP Paint on my tressure treated pine cabin?

Pressure treated timber should be weathered for at least six months prior to painting. After this period, the timber should be cleaned off, degreased and the MSP Paint can be applied