Barrettine Decking Oil

Barrettine Decking Oil is an oil-based decking stain that is perfect for all types of wooden decking, summer houses, sheds, fences, and other garden wood. Solvent-based formulation for deep penetration and enhancing the natural grain and beauty of wooden decking. Will not crack, peel, or flake.

• Looking for an anti-slip finish? Try Barrettine Anti-Slip Decking Oil, which can be applied as a top coat after applying Barrettine Decking Oil
• Looking for a dedicated treatment for your log cabin or shed? We recommend Barrettine Log Cabin Treatment

Please Note: Barrettine have recently changed the name of one their colours 'Light Oak', this is now called 'Amber Light Oak', however the colour, finish and formula remain the same.

Decked areas should be clean, dry, and free from dirt, debris, and other surface contaminates prior to treatment.

New Decking Preparation

For all bare wood decking including tanalised, pressure treated and preservative impregnated decking timbers.

New Softwood decking

1. For the best protection, treat all sides of the decking boards with a suitable exterior wood preservative
2. Treat the end grain with Barrettine End Grain Preserver prior to installation
3. Sweep the decking with a stiff broom to remove all traces of surface dirt and debris
4. Use a suitable decking cleaner if required before oiling

New Hardwood decking

New hardwood decking usually requires a period of weathering to allow the surface grain to open. This allows for better absorption of the decking oil. Check the decking manufacturer's guidance on how long decking should weather before applying a decking treatment.

Old Decking Preparation

1. Ensure that all 'coating' type finishes such as paints, varnishes and varnish like stains have been fully removed to expose bare wood by either jet washing, sanding or using a dedicated decking stripper and remover. This may require more than one attempt.
2. Old oil finishes should be cleaned thoroughly with Barrettine Decking & Patio Cleaner or other suitable decking cleaner
3. For decking affected by mould, algae or moss, use a Barrettine Mould and Mildew Cleaner
4. Any existing cases of woodworm can be treated with Barrettine Premier Woodworm Killer
5. For the best protection, treat with Barrettine Premier Universal Preserver
6. If possible, preserve all sides including end grain prior to installation
7. Sweep the decking with a stiff broom to remove all traces of surface dirt and debris before oiling a deck

Always do a test area before starting any project to check product suitability and final finish. Follow the manufacturer's instructions on the tin at all times.

Do not apply Barrettine Decking Oil in wet conditions or if rain, frost or snow is likely before the product is dry. Decked areas should be completely dry before application. Stir thoroughly before and periodically during application.

1. Apply a thin, even film of decking oil with a suitable decking applicator
2. Work the oil into the surface of the wood grain
3. Wipe off any excess oil with a clean, lint-free cloth
4. Allow the first coat to fully dry, then apply a second coat as above
5. Allow 24 hours to dry completely before heavy use

Two coats of Barrettine Decking Oil are usually sufficient but this may vary depending on the type and condition of the timber to be treated.

Cleaning Equipment

After use, paint brushes can be cleaned with Barrettine Brush Cleaner or Barrettine Paint Brush Restorer.

Regular Cleaning

To preserve the look and performance of the oiled finish for longer it is recommended that decked areas are swept with a stiff broom on a regular basis. This is to remove loose leaves, dirt and other organic matter that can settle on the decking boards and in the grooves, which can degrade or damage the finish and decking timbers over time.

Deep Cleaning

Scuff marks, stains, grease and other surface contaminates can normally be cleaned with Barrettine Driveway, Decking and Patio Cleaner. Stubborn marks and stains may require a light sanding and a thin application of Barrettine Decking Oil to restore the affected area.

Repair

High foot traffic areas that start to appear worn or tired, or that are losing the ability to repel water effectively can be easily restored. First clean with a suitable decking cleaner then re-apply a thin coat of Barrettine Decking Oil to the affected area for an invisible repair.

Maintenance

If the finish begins to look tired or worn over time, or loses its ability to repel water, simply re-apply a fresh coat of Barrettine Decking Oil, following the Preparation and Application instructions above.

Can Barrettine All-In-One Decking Oil be used on wood previously painted with a wood primer?

As a penetrative product, this is designed to be used on top of bare wood or preserved/ pressure treated/ tanalised timber.

What's the difference between a coloured decking oil and a decking stain?

Coloured decking oils and decking stains both change the appearance of wooden decking by changing the natural colour of the decking boards. Most types of decking stain form a coloured coating over the top of the timber while decking oils penetrate into the wood grain and stain the wood from within. In terms of maintenance, decking oils are easier to patch repair and maintain, plus they will never crack, peel or flake.

I have received "Cedar Red" rather than "Red Cedar" - what is the difference?

Both the items are the same inside but potentially different wording on the name. Please check out Barrettines website directly with them and they will be able to confirm this. There is no other variation on the colour.