Zinsser Perma-White Interior

Zinsser Perma-White Interior is a durable, mould resistant, interior paint. It provides long lasting protection on a range of surfaces in high humidity areas, such as kitchens, bathrooms, wet rooms, laundry rooms, basements, hot tub rooms, locker rooms, and more. A self priming paint which can be applied to new or previously painted drywall, cured plaster, cement, concrete blocks, ceramic tiles, laminates, and primed or previously painted surfaces without the need for sanding. Can be used to overcoat any quality waterproofing coating to prevent mould and mildew growth.

Matt - offers a low sheen finish, ideal for use in kitchens and basements

Satin - offers a tough and washable finish, for areas of high wear and tear, such as bathrooms and laundry rooms

• In need of a stain block which can block powerful odours, as well as stains? Use Zinsser B-I-N

To get the best results, ensure surfaces to be painted are sound, clean and dry (new surfaces particularly must be fully dry), and free from all defective or poorly adhering material, dirt, grease and dust.

1. Special precautions should be taken during surface preparation of pre-1960s paint surfaces over wood and metal as they may contain harmful lead
2. Remove and treat any mould and mildew on interior surfaces using Zinsser Mould Killer and Remover
3. If using in commercial buildings or schools and care homes etc. Follow appropriate guidelines for mould removal
4. Cover any staining from mould and mildew, tanning or rust using Zinsser Bulls Eye 1-2-3 prior to coating

Always do a test area before starting any project to assess product suitability and final finish. Follow the manufacturer's instructions on the tin at all times.

Only apply at temperatures ranging between 10°C and 32°C and a relative humidity of no more than 80%.

1. Stir thoroughly before and periodically during use
2. Apply evenly and consistently, using a good quality synthetic bristle brush, microfibre roller, applicator pad or spray gun (Use tip size 0.017 at pressure 2000 - 2600 psi)
3. It is recommended that 2 coats of Zinsser Perma-White Interior are applied
4. Allow 2 hours drying time between coats
5. When used in bathrooms, allow 24 hours to fully dry before subjecting surfaces to steam and moisture
6. Surfaces become scratch resistant in 5 - 7 days, when fully cured

Thinning Guidelines

• Normal use: Thinning is not required
• Conventional and Airless spray application (not to be exceeded): Add up to 10% of water

Cleaning Equipment

Clean brushes, rollers and any spillages immediately after use, using warm soapy water.