Zinsser B-I-N

Zinsser B-I-N is an ultimate, multi-surface coating which blocks powerful odours such as smoke, pet odours and nicotine. It offers excellent adhesion to most surfaces without the need of sanding and boasts superior stain blocking qualities on interior surfaces such as, ceilings, walls, doors, furniture, and other painted surfaces. It can also be used for spot priming exterior stains such as, graffiti, rust, smoke, grease, asphalt, and water stains. Perfect for use as a primer on interior surfaces such as, wood, metal, drywall, plaster, glass, tiles and more. Seals unpainted and porous surfaces and can be used to prime pre-existing wall coverings to hide strong colours or patterns.

• Looking for a stain block for areas of high humidity? Try, Zinsser Perma-White Interior
• In need of an all-purpose, stain blocking primer and sealer that offers a rust resistance guarantee? Use Zinsser Bulls Eye 1-2-3 Plus

For the best results, ensure surfaces to be coated are sound, clean and dry, and free from all defective or poorly adhering material such as dirt, grease, paint or adhesives. If needed, clean surface using an appropriate ammoniated cleaning solution. Never use tri sodium phosphate-based cleaners.

1. Take special precautions during surface preparation of pre-1960s paint surfaces over wood and metal as they may contain harmful lead
2. Sand all edges of remaining coating until smooth
3. Using an 80 - 100 grit sandpaper, lightly sand exterior timber to remove loose or weathered wood fibres and mill glaze
4. Clean as much of the existing stain as possible, prior to priming
5. Remove and treat any mould and mildew on interior surfaces using Zinsser Mould Killer and Remover
6. Fill any nail holes and imperfections with a suitable multi-purpose filler and spot prime the area
7. All areas of rust should be cleaned using a wire brush

Always do a test area before starting any project to check product suitability and effectiveness. Follow the manufacturer's instructions on the tin at all times.

Only apply at temperatures ranging between -1°C and 32°C and a relative humidity of no more than 70%.

1. Stir thoroughly before and periodically during use
2. Apply Zinsser B-I-N with a good quality natural or synthetic brush, microfibre roller, applicator pad or spray gun
3. Apply 1 full coat to prepared surfaces. A second coat on very porous surfaces or heavy staining may be necessary
4. Allow 45 minutes between coats
5. Fully cured in 1 - 3 days

Spray gun Guidelines

• Normal use: Thinning is not required
• Airless sprayer: Use tip size 0.011 - 0.013 at pressure 800 - 1200 psi
• Conventional sprayer: Spray at 45 - 55 psi

Cleaning Equipment

Clean brushes and rollers immediately after use, using 1 part ammonia to 3 parts water. Any spillages should be cleaned up using denatured alcohol. For removing dried paint on brushes and rollers, use Zinsser B-I-N Brush Cleaner and Restorer