Following on from Part 1 of our Decking Guide, in Part 2 Wood Finishes Direct talk about some of the more common problems that can affect decking maintenance. We also take a look at the various types of decking treatments on the market and the differences between them.
Common garden decking problems
- Wood blackening happens when fungus forms on the surface of the wood, usually because water has penetrated the wood and reacted with the brown tannin it contains. Different woods have different levels of tannin, but fungal blackening can be removed with a special mould and mildew cleaner.
- Greying or silvering occurs when the wood has been damaged by water and sun, but the effect can be reversed with oxalic acid. There’s a great product from Osmo called Wood Reviver Gel, which contains the acid to help restore the natural colour of the wood. Just like magic – it’s such an amazing transformation!
Grey decking is a common issue that can be quickly and easily resolved
How long does a garden decking finish last?
Decking is one of the most difficult areas in a garden to keep in good order. During the year it gets a lot of foot traffic in all weathers, and it’s open to the elements, insects, leaves and mud, all of which can remove the finish a little at a time. When the biggest contributing factor is the weather, life becomes very unpredictable. That’s why it’s difficult for manufacturers to give accurate timescales for how long a particular finish will last.
As a general rule, the most exposed parts of your wooden decking suffer the worst weather damage, needing more maintenance and more frequent attention. The bottoms of decking spindles get all dry or go black or grey, suffering more than the tops because running water gradually wears the finish off. Decking oil comes into its own here, with the affected areas easily rubbed down with steel wool or sandpaper and repaired seamlessly by treating them with a fungicidal wash (if required), then using more oil.
Once it’s finished, one of the easiest ways to extend the life of your decking is regular sweeping. Other than that, regular use of a specialist decking cleaner will do the trick.
Decking treatment terminology
The wood finishing industry’s terminology is full of inconsistencies. Most people don’t know that a lacquer and a varnish are the same thing, for example, and pigments are often confused with dyes. So we thought it’d be useful to clear up a few popular misconceptions:
Decking stains – A normal water-based wood stain is purely a colour, usually a liquid. It doesn’t give the wood a sheen or protect it. It just colours the wood, and you need to add a protective finish on top. Decking stain is different. It’s more than a colouring liquid, with added protection. But there’s more…
Take Ronseal. They’re one of Britain’s leading suppliers of decking finishes, yet they have two different decking products, both called a stain but both very different. The product they call Ronseal Decking Stain falls into the sealer category, a paint-like material which does nothing to enhance the grain and will likely start to peel and flake over time as the product degrades. Their Advanced Decking Stain was far superior and oil-based. In our opinion, neither qualifies as a decking stain.
- Ronseal Decking Stain is actually a coloured decking treatment.
- Ronseal Advanced Decking Stain, now discontinued, was actually a coloured decking oil.
What is decking oil? – If it’s called a decking oil, it is probably exactly that. In our experience, it’s always a good choice when made by a reputable company like Barrettine or Ronseal.
What is wooden decking treatment? ‘Treatment’ can mean either an oil or a surface coating. Be sure to find out which to make sure it meets your requirements.
What is a garden decking finish? As above, a ‘finish’ could mean more or less anything. Proceed with caution.
Next time, in the final part of our complete garden decking treatment guide, we’ll take a look at how best to apply decking treatments, plus top tips about decking maintenance and making the most of your beautiful decking all year round.
26 comments
Hi, I’m confused about whether to use a decking oil or one that has a wax included. I cannot seem to find an answer anywhere! Many thanks
Reply to Sally:
Hello Sally,
If you are treating new decking then you could apply a coat of Preservative (https://www.wood-finishes-direct.com/products/barrettine-premier-wood-preservative) which will protect against mould, mildew and rot. And then a top coat of a Decking Oil, such as Barrettine Decking Oil (https://www.wood-finishes-direct.com/products/barrettine-decking-oil), that will give water repellency and some UV protection from sun damage.
For extra protection from the sun you could apply a coloured oil the darker the colour the more UV protection you will get and the Barrettine has some coloured Oils in its range. I hope that helps and if you have any further questions please do not hesitate to let me know.
If you are applying to already treated decking then my recommendation would depend on the previous treatment.
All the Best Sam.
Staining decking with slate gray by cupronol can I get sealant to stop peeling
Reply to Joanne:
Hello Joanne,
I can’t really comment on the particular product that you have used as we don’t stock it. But as it is a surface sealer, preparation is very important before applying such products, and there are a number of issues that could cause the stain to peel and flake. If you would like to send us some photos and a brief description of your application process we can try to advice you on the best way forward. Our email is wood@finishes.direct
Have used 3tubs of advanced mahogany deck stain will it be ok to put 2 Coates of ronseal deck stain on top ( the one that comes in a tin ) cheers
Reply to Dave:
Hi Dave,
If looking to apply additional coats of decking stain or decking oil on top of an existing one, it’s important to ensure that it is the same product. If not, check with the Ronseal to see if the two different types of product are compatible with each other. Not all products will work on top of another and you may find that the newly applied decking stain will not adhere to the old stain. Another possibility is that the two products may produce a reaction resulting in blistering, cracking or peeling of the surface coatings.