Graphenstone GrafClean Eggshell

Graphenstone GrafClean Eggshell is a practical choice for decorating spaces where walls and woodwork are exposed to everyday handling and marks. Pair it with Graphenstone GrafClean Matt to use a flatter finish on walls and ceilings while continuing the same colour scheme onto woodwork and joinery.

Suitability

Suitable for interior walls and ceilings, including those in hallways, kitchens and bathrooms. It can also be used on correctly prepared and primed woodwork, joinery and metal, including doors, skirting boards and window frames. It is not recommended for kitchen units.

To compare alternative finishes, specialist paints and preparation products, explore the Graphenstone range below.

Product Use Graphenstone GrafClean Matt Paint A washable matt paint for interior walls and ceilings. Graphenstone Naturcolor Interior Matt A breathable mineral matt paint for interior walls and ceilings. Graphenstone Ambient Primer L42 A primer for preparing suitable absorbent mineral surfaces. Graphenstone Ambient Pro+ Air Purifying Matt Paint A breathable mineral paint with air-purifying properties. Graphenstone GCS Interior Paint A breathable, wipeable flat matt paint for interior walls and ceilings. Graphenstone Siena A decorative limewash paint that creates soft variations in tone.

Surfaces should be clean, dry, sound and free from dust, dirt, grease and other contaminants that could affect adhesion. Graphenstone GrafClean Eggshell can be applied to new or previously painted plaster, plasterboard, filled surfaces, prefabricated boards, primed wallpaper and brick, primed wood and MDF provided the surfaces are correctly prepared.

• Remove any loose, flaking or poorly adhered paint and clean the surface thoroughly.
• Take extra care when removing paint applied before the 1960s, as it may contain lead. Seek professional advice if you are unsure.
• Fill cracks, holes and surface imperfections with a suitable filler
• Allow new plaster and other mineral surfaces to cure for at least 28 days before painting.
• Lightly sand glossy, satin or particularly smooth surfaces to provide a key, then remove all sanding dust.
• Apply Graphenstone Ambient Primer L42 to absorbent surfaces. Prime or mist coat plasterboard and spot prime filled or repaired areas where required.
• Prime wood, metal and other non-porous surfaces with Graphenstone Four2Four
• Treat any mould or organic growth with a suitable mould remover like Barrettine Mould and Mildew Cleaner then allow the surface to dry completely.

We recommend trialling a test area before starting your project to check suitability and compatibility. Follow the manufacturer's instructions on the tin at all times.

Apply when the surrounding air and surface temperatures are between 7°C and 35°C and relative humidity is below 80%. Choose a surface away from direct sunlight and allow any sun-warmed areas to cool before painting.

When using more than one container of the same colour, combine and mix them before application to help maintain an even colour across the complete surface.

• Shake the container before opening, then stir the paint thoroughly before and periodically during application. Avoid excessive mixing as this can introduce air bubbles.
• Adjust the consistency with clean water where required:
• Walls and ceilings: Dilute with 10% to 15% clean water.
• Woodwork and joinery: Dilute with 5% to 10% clean water.
• Spray application: Dilute with 15% to 20% clean water.
• Apply 2 or 3 even coats using a brush, medium-pile roller, like the Osmo Premium Roller, Brush and Tray Set or suitable spray equipment.
• Work methodically in manageable sections, maintaining a wet edge to reduce visible joins and lap marks.
• When painting walls, cut in and roll one wall at a time. Use the same dilution rate throughout and roll close to the edges to minimise picture framing.
• Spread the paint evenly and avoid applying overly thick coats, as excess paint may affect curing and cause fine surface cracking.
• Allow approximately 2 to 4 hours between coats. The paint will be touch dry in around 1 hour and fully dry after approximately 24 hours.
• Clean brushes, rollers and spray equipment with warm water immediately after use.

Although Graphenstone GrafClean Eggshell is fully dry after approximately 24 hours, it continues to harden for around 30 days. Protect the painted surface from water, condensation and splashes for the first 4 to 5 days, particularly in kitchens and bathrooms. Avoid rubbing, washing or cleaning the finish until it has fully cured.

Regular Cleaning

Once fully cured, wipe away everyday marks with a soft, damp cloth. Use a mild soapy solution for more persistent dirt, taking care to avoid abrasive cleaners, scouring pads and excessive scrubbing.

Repairs

Clean the affected area and lightly sand any damaged or uneven edges. Remove the sanding dust, prime exposed or repaired surfaces where required and apply Graphenstone GrafClean Eggshell in thin, even coats. Allow each coat to dry fully before applying the next.

Here are some of the more commonly asked questions and answers about Graphenstone GrafClean Eggshell.

What is the difference between Graphenstone GrafClean Eggshell and GrafClean Matt?

GrafClean Eggshell dries to a low-sheen finish of approximately 15%, while GrafClean Matt has a flatter appearance. Eggshell is particularly suited to high-traffic areas, interior woodwork and joinery where a durable, washable finish is required.

Can Graphenstone GrafClean Eggshell be used on walls and ceilings?

Yes. GrafClean Eggshell can be applied to correctly prepared interior walls and ceilings. Its Class 1 wet-scrub resistance makes it particularly useful in busy areas where the painted surface may require regular cleaning.

Is Graphenstone GrafClean Eggshell suitable for kitchens and bathrooms?

Yes. Its washable, durable finish makes it suitable for kitchens and bathrooms. Protect newly painted surfaces from water, splashes and condensation for the first 4-5 days and allow approximately 30 days for the coating to cure fully.

Can Graphenstone GrafClean Eggshell be used on woodwork?

Yes. GrafClean Eggshell is suitable for correctly prepared and primed interior woodwork and joinery, including doors, skirting boards and window frames. Not suitable for kitchen units. Bare wood should be treated with a compatible primer before applying the paint.

Can Graphenstone GrafClean Eggshell be applied to metal?

Yes. It can be applied to properly prepared and primed interior metal. Ensure the surface is clean, dry and free from corrosion, then use a compatible multi-surface primer to promote adhesion before painting.

How many coats of Graphenstone GrafClean Eggshell are required?

Graphenstone recommends applying 2-3 thin, even coats to achieve consistent colour and coverage. Allow approximately 2-4 hours between coats, depending on the temperature, humidity and condition of the surface.

Is Graphenstone GrafClean Eggshell washable?

Yes. Once fully cured, GrafClean Eggshell achieves Class 1 wet-scrub resistance under EN 13300. Everyday marks can be wiped away with a soft, damp cloth, while abrasive cleaners and scouring pads should be avoided.