img-harvest-gold-9l

Ronseal One Coat Shed and Fence Protector

Harvest Gold / 9L
£22.41
Skip to product information

Ronseal One Coat Shed and Fence Protector

4.0/5 (1 review)
MPN: KCB.8174503.41100.82 GTIN: 5056402401575
Product Image
Colour
Harvest Gold
size
9L
£22.41

Quantity

Limited to 4 in stock.

A one coat product that offers colour and protection to rough sawn sheds and fences for up to two years

Features

  • 100% showerproof in one hour
  • Keeps its colour for up to two years
  • Protects your wood from greying
  • Can be brushed or sprayed
  • Comes in a range of natural colours
  • Matt finish
  • Low V.O.C
Brand
Ronseal
No. of coats
1 coat
Size
9L

Overview

Ronseal One Coat Shed and Fence Protector will protect your shed or fence from rain and prevent it greying in the sun. Ronseal One Coat Shed and Fence Protector can be used on any new or previously stained rough sawn wood however you can't use this stain on decking, garden furniture or other smooth planed wood.

Preparation

Surfaces should be cleaned with warm water, detergent and a stiff brush. Make sure that all mould or algae is removed and rinse substrate well. For the best results, previous treatments should be removed or well weathered.

Application

Always do a test area before starting any project to check product suitability and final finish. Always follow the manufacturer's instructions.

Cold wet weather stops the stain from drying and could wash it off. It needs to be a warm day with the temperature above 10°C and no rain is forecast.

Ronseal One Coat Fence Life can be applied with a Ronseal Fence Life Brush, or can also be spray applied with the Ronseal Pump Sprayer.

Brushing:

  1. Apply a generous amount of stain to your brush and apply a thick coat to your wood but don't spread it too far
  2. After one hour, it will be 100% showerproof. It takes four hours to dry fully
  3. If your wood is weathered, you may need to apply a second coat. After the first coat has dried, review it to see if a second coat is required

Spraying:

  1. Pour the stain into the tank
  2. Pump it up or turn it on and start spraying. Use long, sweeping, horizontal arm movements for an even finish
  3. Move along the full width of the fence panel, drop down and repeat the process. Overlap each pass by 50% for even coverage

Please note: If you want to cover up a bright, strong or contrasting colour, you may need to use extra coats.

Aftercare

Regularly inspect your wood for signs of damage. If you notice any, just apply another coat of the stain to protect the wood.

Datasheets

  • 5 stars: 0 (0%)
  • 4 stars: 1 (100%)
  • 3 stars: 0 (0%)
  • 2 stars: 0 (0%)
  • 1 star: 0 (0%)
J
Joyce Stevens
Does the job

I have used Ronseal for years it does what it’s supposed to do .

You may also like